7 open source boards using the TVS2200DRVR

Real designs built with the TVS2200DRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TVS2200DRVR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TVS2200DRVR connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pins have a capacitor to GND on 4 of 6 designs, most often 100 nF (then 10 nF).
GNDpin 1, 2, 3, 7Connected to: GND 100%
INpin 4, 5, 6Connected to: VBUS_INPUT 50% · a signal 50%
  • Capacitor to GND on 67% · 100 nF (9), 10 nF (9), 4.7 µF (6)
  • Series resistor on 33% · 4.7 kΩ (3), 220 kΩ (3), 120 kΩ (3)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ovc4 by osrf, PS2 AIO Mainboard by tschicki, Picard by weiiwang01 and Parsnip by LimesKey.

The TVS2200DRVR in open source designs

The gallery holds 7 open source boards using the TVS2200DRVR from 6 GitHub repositories; a typical one measures about 95 × 73 mm and carries around 181 components.

86% use four copper layers or more, and 29% carry an open source license.

The most starred is Ovc4 by osrf.

Parts used alongside the TVS2200DRVR

Microcontrollers on boards using the TVS2200DRVR

TVS2200DRVR: common questions

Where can I find a TVS2200DRVR reference design?

Each of the 7 boards on this page is a real design using the TVS2200DRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TVS2200DRVR IN pin connected?

The IN pins have a capacitor to GND on 4 of 6 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the TVS2200DRVR.

Which microcontrollers do boards using the TVS2200DRVR use?

Most are built on ESP32 (4), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the TVS2200DRVR?

The median is 95 × 73 mm, and 14% are two-layer designs.

What is the most popular open source board using the TVS2200DRVR?

By GitHub stars, Ovc4 by osrf, with 207 stars.

Can I simulate one of these boards using the TVS2200DRVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part