7 open source boards using the UA78M33

Real designs built with the UA78M33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the UA78M33

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the UA78M33 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin is tied to 3.3V on 5 of 5 designs.
  • The IN pin is tied to 12C on 3 of 5 designs (a signal on 2).
  • Pin 4 is tied to GND on 2 of 3 designs.
INpin 1Connected to: 12C 60% · a signal 40%
GNDpin 2Connected to: GND 100%
OUTpin 3Connected to: 3.3V 100%
Pin 4Connected to: GND 67% · not connected 33%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include UPD-board by uniclogs, RGB driver board for panStamp by panStamp, Esp8266 by panStamp and Capteur by mbouyer.

The UA78M33 in open source designs

The gallery holds 7 open source boards using the UA78M33 from 5 GitHub repositories; a typical one measures about 71.1 × 60 mm and carries around 27 components.

100% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.

The most starred is UPD-board by uniclogs.

Microcontrollers on boards using the UA78M33

UA78M33: common questions

Where can I find a UA78M33 reference design?

Each of the 7 boards on this page is a real design using the UA78M33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the UA78M33 OUT pin connected?

The OUT pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the UA78M33.

How is the UA78M33 IN pin connected?

The IN pin is tied to 12C on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the UA78M33.

How is the UA78M33 pin 4 connected?

Pin 4 is tied to GND on 2 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the UA78M33.

Which microcontrollers do boards using the UA78M33 use?

Most are built on PIC (3), ESP32 (1) and ESP8266 (1).

How big is a typical board using the UA78M33?

The median is 71.1 × 60 mm, and 100% are two-layer designs.

What is the most popular open source board using the UA78M33?

By GitHub stars, UPD-board by uniclogs, with 31 stars.

Can I simulate one of these boards using the UA78M33 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part