7 open source boards using the UCC27511DBVR
Real designs built with the UCC27511DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
I8080-sbc
quasiengineer
100 × 100 mm111 parts2LNo license13PDB
Malcollm
168.6 × 234.8 mm170 parts6LNo license4STM32
Pd1180-epr
techmannih
85.9 × 85.9 mm255 parts4LNo license0Ito controller
luciddreams
160 × 110 mm202 parts4LNo license0Microduck Power Regen R22
ldcyes
65 × 75 mm80 parts4LNo license0Microduck Brake Control R8
ldcyes
32 × 30 mm39 parts2LNo license0Kicker Control Circuit
DVA490-474-Project-Course
38.5 × 33 mm14 parts2LMIT0
How designs wire the UCC27511DBVR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the UCC27511DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The OUTH pin has a series resistor on 5 of 6 designs, most often 4.7 Ω (then 10 kΩ).
- The OUTL pin has a series resistor on 5 of 6 designs, most often 10 Ω (then 4.7 Ω).
- The IN- pin is tied to GND on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 12V 67% · a signal 33% |
|
| OUTHpin 2 | Connected to: Signal 100% |
|
| OUTLpin 3 | Connected to: Signal 83% · not connected 17% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| IN-pin 5 | Connected to: GND 83% · a signal 17% | — |
| IN+pin 6 | Connected to: A connector 33%, TLV3201AIDBVR 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include I8080-sbc by quasiengineer, PDB by Malcollm, Kicker Control Circuit by DVA490-474-Project-Course and Microduck Brake Control R8 by ldcyes.
The UCC27511DBVR in open source designs
The gallery holds 7 open source boards using the UCC27511DBVR from 6 GitHub repositories; a typical one measures about 85.9 × 85.9 mm and carries around 111 components.
57% use four copper layers or more, and 14% carry an open source license.
The most starred is I8080-sbc by quasiengineer.
Parts used alongside the UCC27511DBVR
Microcontrollers on boards using the UCC27511DBVR
What boards using the UCC27511DBVR are built for
UCC27511DBVR: common questions
Where can I find a UCC27511DBVR reference design?
Each of the 7 boards on this page is a real design using the UCC27511DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the UCC27511DBVR VDD pin?
The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the UCC27511DBVR.
What resistor goes on the UCC27511DBVR OUTH pin?
The OUTH pin has a series resistor on 5 of 6 designs, most often 4.7 Ω (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the UCC27511DBVR.
What resistor goes on the UCC27511DBVR OUTL pin?
The OUTL pin has a series resistor on 5 of 6 designs, most often 10 Ω (then 4.7 Ω). Counted from the KiCad layouts of 6 open source designs using the UCC27511DBVR.
What parts are used alongside the UCC27511DBVR?
The ADS1115IDGSR, INA226AIDGSR and TLV3201AIDBVR appear in the most repositories here.
Which microcontrollers do boards using the UCC27511DBVR use?
Most are built on STM32 (2).
How big is a typical board using the UCC27511DBVR?
The median is 85.9 × 85.9 mm, and 43% are two-layer designs.
What is the most popular open source board using the UCC27511DBVR?
By GitHub stars, I8080-sbc by quasiengineer, with 13 stars.
Can I simulate one of these boards using the UCC27511DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.