2 open source boards using the ULN2803C

Real designs built with the ULN2803C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ULN2803C in open source designs

The gallery holds 2 open source boards using the ULN2803C from 2 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 150 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is K9HZ 100W 11band LPF-Control by DRWJSCHMIDT.

ULN2803C: common questions

Where can I find a ULN2803C reference design?

Each of the 2 boards on this page is a real design using the ULN2803C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ULN2803C?

The 74HC237, AD7991YRJZ, AD8307, CD74HC4514M96 and L7808 appear in the most repositories here.

How big is a typical board using the ULN2803C?

The median is 100 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the ULN2803C?

By GitHub stars, K9HZ 100W 11band LPF-Control by DRWJSCHMIDT, with 18 stars.

Can I simulate one of these boards using the ULN2803C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part