6 open source boards using the USB3320C-EZK-TR
Real designs built with the USB3320C-EZK-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Aper-Oculus
ApotheoTech
147.4 × 90 mm557 parts16LGPL-3.032STM32
TRNXSDR-carrier
acruxcz
91.8 × 139.8 mm702 parts6LCERN-OHL-S-2.015STM32
Main
HelloAlex4
115 × 82.3 mm249 parts4LCC-BY-NC-4.010FPGA
IO SDR 1.1
SunnyYoshimitsu
91.5 × 91.5 mm268 parts6LNo license3FPGA
MA-XILINX-FPGA-10-LAYER
moafkaljabi
84.2 × 53.6 mm425 parts10LNo license1Controller
krasin
105 × 72 mm108 parts4LCERN-OHL-S-2.01
How designs wire the USB3320C-EZK-TR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the USB3320C-EZK-TR connects to, and the resistors, capacitors and other passives placed on it.
- The RBIAS pin has a resistor to GND on 6 of 6 designs, most often 8.06 kΩ.
- The SPK_L pin is left unconnected on 6 of 6 designs.
- The SPK_R pin is left unconnected on 6 of 6 designs.
- The VDD33 pin has a capacitor to GND on 4 of 6 designs, most often 100 nF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| REFSEL1pin 11 | Connected to: 1.8V 67% · GND 17% · a signal 17% | — |
| NCpin 12 | Connected to: Not connected 100% | — |
| REFSEL2pin 14 | Connected to: 1.8V 67% · not connected 17% · a signal 17% | — |
| SPK_Lpin 15 | Connected to: Not connected 100% | — |
| SPK_Rpin 16 | Connected to: Not connected 100% | — |
| DPpin 18 | Connected to: A connector 67% |
|
| DMpin 19 | Connected to: A connector 67% |
|
| VDD33pin 20 | Connected to: 3.3V 50% · a signal 50% |
|
| VBATpin 21 | Connected to: 3.3V 83% · a signal 17% |
|
| VBUSpin 22 | Connected to: Signal 100% |
|
| RBIASpin 24 | Connected to: Signal 100% |
|
| XOpin 25 | Connected to: Not connected 67% · a signal 33% |
|
| REFCLKpin 26 | Connected to: Signal 100% |
|
| RESETBpin 27 | Connected to: Signal 100% |
|
| VDD18pin 28, 30 | Connected to: 1.8V 50% · a signal 50% |
|
| VDDIOpin 32 | Connected to: 1.8V 67% · a signal 33% |
|
| GNDpin 33 | Connected to: GND 100% | — |
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Aper-Oculus by ApotheoTech, TRNXSDR-carrier by acruxcz, MainPCB by HelloAlex4 and IO SDR 1.1 by SunnyYoshimitsu.
The USB3320C-EZK-TR in open source designs
The gallery holds 6 open source boards using the USB3320C-EZK-TR from 6 GitHub repositories; a typical one measures about 98.4 × 86.2 mm and carries around 347 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Aper-Oculus by ApotheoTech.
Parts used alongside the USB3320C-EZK-TR
What boards using the USB3320C-EZK-TR are built for
USB3320C-EZK-TR: common questions
Where can I find a USB3320C-EZK-TR reference design?
Each of the 6 boards on this page is a real design using the USB3320C-EZK-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the USB3320C-EZK-TR RBIAS pin?
The RBIAS pin has a resistor to GND on 6 of 6 designs, most often 8.06 kΩ. Counted from the KiCad layouts of 6 open source designs using the USB3320C-EZK-TR.
How is the USB3320C-EZK-TR SPK_L pin connected?
The SPK_L pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the USB3320C-EZK-TR.
How is the USB3320C-EZK-TR SPK_R pin connected?
The SPK_R pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the USB3320C-EZK-TR.
What parts are used alongside the USB3320C-EZK-TR?
The 93LC56B-I/SN, INA226AIDGSR and TXS02612RTWR appear in the most repositories here.
Which microcontrollers do boards using the USB3320C-EZK-TR use?
Most are built on FPGA (2), STM32 (2) and PIC (1).
How big is a typical board using the USB3320C-EZK-TR?
The median is 98.4 × 86.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the USB3320C-EZK-TR?
By GitHub stars, Aper-Oculus by ApotheoTech, with 32 stars.
Can I simulate one of these boards using the USB3320C-EZK-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.