6 open source boards using the W25Q16JVZPIQ
Real designs built with the W25Q16JVZPIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Harpia FC
gabs911
86 × 56.7 mm62 parts2LNo license5RP2040/RP2350
Button midi thing
brunostjohn
248.1 × 248.1 mm289 parts2LNo license0RP2040/RP2350
Kashboard
kashsuks
21 × 51.1 mm35 parts2LMIT0RP2040/RP2350
My devboard-
Nitish5196
21 × 51 mm33 parts2LNo license0RP2040/RP2350
ArxRP2040
ArxDraco007
21 × 51 mm31 parts2LNo license0RP2040/RP2350
Controller b r1
4lml4
131.5 × 13 mm45 parts4LNo license2
How designs wire the W25Q16JVZPIQ
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the W25Q16JVZPIQ connects to, and the resistors, capacitors and other passives placed on it.
- The CS pin has a series resistor on 5 of 6 designs, most often 1 kΩ.
- The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
- The CS pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
- The EXP pin is left unconnected on 4 of 6 designs (GND on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
| EXPpin 9 | Connected to: Not connected 67% · GND 33% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Harpia FC by gabs911, Controller b r1 by 4lml4, ArxRP2040 by ArxDraco007 and Button midi thing by brunostjohn.
The W25Q16JVZPIQ in open source designs
The gallery holds 6 open source boards using the W25Q16JVZPIQ from 6 GitHub repositories; a typical one measures about 53.5 × 51.1 mm and carries around 40 components.
83% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Harpia FC by gabs911.
Parts used alongside the W25Q16JVZPIQ
Microcontrollers on boards using the W25Q16JVZPIQ
What boards using the W25Q16JVZPIQ are built for
W25Q16JVZPIQ: common questions
Where can I find a W25Q16JVZPIQ reference design?
Each of the 6 boards on this page is a real design using the W25Q16JVZPIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the W25Q16JVZPIQ CS pin?
The CS pin has a series resistor on 5 of 6 designs, most often 1 kΩ. Counted from the KiCad layouts of 6 open source designs using the W25Q16JVZPIQ.
What decoupling capacitors do designs use on the W25Q16JVZPIQ VCC pin?
The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the W25Q16JVZPIQ.
How is the W25Q16JVZPIQ EXP pin connected?
The EXP pin is left unconnected on 4 of 6 designs (GND on 2). Counted from the KiCad layouts of 6 open source designs using the W25Q16JVZPIQ.
Which microcontrollers do boards using the W25Q16JVZPIQ use?
Most are built on RP2040/RP2350 (5) and STM32 (1).
How big is a typical board using the W25Q16JVZPIQ?
The median is 53.5 × 51.1 mm, and 83% are two-layer designs.
What is the most popular open source board using the W25Q16JVZPIQ?
By GitHub stars, Harpia FC by gabs911, with 5 stars.
Can I simulate one of these boards using the W25Q16JVZPIQ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.