5 open source boards using the W25Q64

Real designs built with the W25Q64, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the W25Q64

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the W25Q64 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF).
  • The CS pin has a pull-up to 3.3V on 2 of 5 designs, most often 47 kΩ.
  • The IO3 pin has a capacitor to GND on 2 of 5 designs, most often 100 nF.
CSpin 1Connected to: The microcontroller 80%
  • Pull-up to 3.3V on 40% · 47 kΩ (2)
GNDpin 4Connected to: GND 100%
IO3pin 7Connected to: The microcontroller 60% · 3.3V 40%
  • Capacitor to GND on 40% · 100 nF (2)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (5), 1 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP8266 Wireless DAP by ZhuYanzhen1, Asynchronous-SPDIF-Mixer by DADDesign-Projects, Thermal camera by fedetft and Digital synth by giacomogramaglia.

The W25Q64 in open source designs

The gallery holds 5 open source boards using the W25Q64 from 5 GitHub repositories; a typical one measures about 100 × 84 mm and carries around 135 components.

100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is ESP8266 Wireless DAP by ZhuYanzhen1.

Microcontrollers on boards using the W25Q64

What boards using the W25Q64 are built for

W25Q64: common questions

Where can I find a W25Q64 reference design?

Each of the 5 boards on this page is a real design using the W25Q64. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q64 VCC pin?

The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the W25Q64.

What pull-up resistor is used on the W25Q64 CS pin?

The CS pin has a pull-up to 3.3V on 2 of 5 designs, most often 47 kΩ. Counted from the KiCad layouts of 5 open source designs using the W25Q64.

How is the W25Q64 IO3 pin connected?

The IO3 pin has a capacitor to GND on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the W25Q64.

What parts are used alongside the W25Q64?

The AMS1117-3.3, 74HC04, DIR9001, MAX3490 and STM32H743VIT6 appear in the most repositories here.

Which microcontrollers do boards using the W25Q64 use?

Most are built on STM32 (3), AVR/Arduino (1) and ESP8266 (1).

How big is a typical board using the W25Q64?

The median is 100 × 84 mm, and 100% are two-layer designs.

What is the most popular open source board using the W25Q64?

By GitHub stars, ESP8266 Wireless DAP by ZhuYanzhen1, with 57 stars.

Can I simulate one of these boards using the W25Q64 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part