5 open source boards using the W65C816SxP
Real designs built with the W65C816SxP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
TELESTRAT II
Fred72z
170 × 170 mm149 parts2LGPL-2.0565c816-pcbs
erikarn
306.6 × 168.1 mm66 parts4LNo license2W65C816S-computer
piotrmski
188 × 79.8 mm49 parts2LNo license065816-breadboard computer
Novolin
100 × 100 mm21 parts2LGPL-2.006502 Computer
Akshajk3
48 × 70.5 mm12 parts2LNo license0
How designs wire the W65C816SxP
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the W65C816SxP connects to, and the resistors, capacitors and other passives placed on it.
- The VP pin is left unconnected on 4 of 5 designs.
- The ABORT pin is tied to 5V on 4 of 5 designs.
- The ML pin is left unconnected on 4 of 5 designs.
- The E pin is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VPpin 1 | Connected to: Not connected 80% · a signal 20% | — |
| RDYpin 2 | Connected to: Signal 60% · not connected 20% · VCC 20% |
|
| ABORTpin 3 | Connected to: 5V 80% · a signal 20% | — |
| IRQpin 4 | Connected to: Signal 80% · not connected 20% |
|
| MLpin 5 | Connected to: Not connected 80% · a signal 20% | — |
| NMIpin 6 | Connected to: Signal 60% · not connected 20% · 5V 20% |
|
| VDDpin 8 | Connected to: 5V 100% | — |
| VSSpin 21 | Connected to: GND 100% | — |
| Epin 35 | Connected to: Not connected 80% · a signal 20% | — |
| BEpin 36 | Connected to: 5V 60% · not connected 20% · a signal 20% | — |
| MXpin 38 | Connected to: Not connected 80% · a signal 20% | — |
| RESpin 40 | Connected to: W65C22SxP 40% |
|
28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TELESTRAT II by Fred72z, 65c816-pcbs by erikarn, 6502 Computer by Akshajk3 and 65816-breadboard computer by Novolin.
The W65C816SxP in open source designs
The gallery holds 5 open source boards using the W65C816SxP from 5 GitHub repositories; a typical one measures about 170 × 100 mm and carries around 49 components.
80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is TELESTRAT II by Fred72z.
Parts used alongside the W65C816SxP
Microcontrollers on boards using the W65C816SxP
What boards using the W65C816SxP are built for
W65C816SxP: common questions
Where can I find a W65C816SxP reference design?
Each of the 5 boards on this page is a real design using the W65C816SxP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the W65C816SxP VP pin connected?
The VP pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the W65C816SxP.
How is the W65C816SxP ABORT pin connected?
The ABORT pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the W65C816SxP.
How is the W65C816SxP ML pin connected?
The ML pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the W65C816SxP.
Which microcontrollers do boards using the W65C816SxP use?
Most are built on PIC (1).
How big is a typical board using the W65C816SxP?
The median is 170 × 100 mm, and 80% are two-layer designs.
What is the most popular open source board using the W65C816SxP?
By GitHub stars, TELESTRAT II by Fred72z, with 5 stars.
Can I simulate one of these boards using the W65C816SxP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.