5 open source boards using the BMP388
Real designs built with the BMP388, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Expansion board v4
naizhao
100 × 62 mm213 parts6LMIT11
STM32Vayu-F722
ishantmahatopro
42 × 42 mm137 parts4LMIT0- schematic only · 11 partsESP32
LIM-Vario
loyermael
11 partsGPL-3.00 - schematic only · 6 partsESP32
Rocket flight computer
birdyboyiyert
6 partsNo license0 
ESP32VENDETTAFC
Caped-Crussader
43.6 × 43 mm129 parts6LCERN-OHL-S-2.028
The BMP388 in open source designs
The gallery holds 5 open source boards using the BMP388 from 5 GitHub repositories; a typical one measures about 43.6 × 43 mm and carries around 129 components.
100% use four copper layers or more, and 80% carry an open source license.
The most starred is VENDETTAFC by Caped-Crussader.
Parts used alongside the BMP388
Microcontrollers on boards using the BMP388
What boards using the BMP388 are built for
BMP388: common questions
Where can I find a BMP388 reference design?
Each of the 5 boards on this page is a real design using the BMP388. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the BMP388?
The ICM-42688-P, AT7456E, STM32F722RET6, USBLC6-2SC6 and W25Q128JVSIQ appear in the most repositories here.
Which microcontrollers do boards using the BMP388 use?
Most are built on ESP32 (3), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the BMP388?
The median is 43.6 × 43 mm, and 0% are two-layer designs.
What is the most popular open source board using the BMP388?
By GitHub stars, VENDETTAFC by Caped-Crussader, with 28 stars.
Can I simulate one of these boards using the BMP388 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.