14 open source boards using the STM32F722RET6

Real designs built with the STM32F722RET6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the STM32F722RET6

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the STM32F722RET6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 4.7 µF).
  • The PH0 pin has a crystal on 12 of 12 designs, most often 8 MHz (then 16 MHz).
  • The VDD pins have a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 4.7 µF).
  • The VCAP_1 pin has a capacitor to GND on 12 of 12 designs, most often 4.7 µF (then 2.2 µF).
VBATpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (22), 4.7 µF (4), 2.2 µF (3)
PH0pin 5Connected to: Signal 100%
  • Crystal on 100% · 8 MHz (7), 16 MHz (1)
  • Capacitor to GND on 75% · 10 pF (3), 20 pF (3), 22 pF (1)
PH1pin 6Connected to: Signal 92%
  • Crystal on 67% · 8 MHz (4)
  • Capacitor to GND on 50% · 20 pF (3), 22 pF (1), 15 pF (1)
  • Series resistor on 33% · 0 Ω (3), 1 MΩ (1)
NRSTpin 7Connected to: A connector 33%
  • Capacitor to GND on 92% · 100 nF (11)
VSSApin 12Connected to: GND 100%
VREF+pin 13Connected to: VREF 50% · a signal 50%
  • Decoupling capacitor on 67% · 100 nF (8), 1 µF (6), 4.7 µF (1)
  • Ferrite bead on 42%
VSSpin 18, 31, 47, 63Connected to: GND 100%
VDDpin 19, 32, 48, 64Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (71), 4.7 µF (8), 1 µF (7)
PA4pin 20Connected to: A connector 25%
  • Pull-up to 3.3V on 33% · 10 kΩ (3), 5.1 kΩ (1)
PB1pin 26Connected to: Signal 67% · not connected 33%
  • Series resistor on 50% · 550 Ω (2), 100 Ω (1), 330 Ω (1)
VCAP_1pin 30Connected to: Signal 100%
  • Capacitor to GND on 100% · 4.7 µF (7), 2.2 µF (5)
PB12pin 33Connected to: AT7456E 25% · not connected 25%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2), 10 kΩ (2)
PA11pin 44Connected to: USBLC6-2SC6 42%
  • Series resistor on 50% · 27 Ω (4), 1.5 kΩ (1), 22 Ω (1)
PA12pin 45Connected to: USBLC6-2SC6 42%
  • Series resistor on 42% · 27 Ω (4), 22 Ω (1)
PB6pin 58Connected to: A connector 25% · not connected 17%
  • Pull-up to 3.3V on 33% · 2.2 kΩ (2), 10 kΩ (1), 5.1 kΩ (1)
PB7pin 59Connected to: A connector 25% · not connected 17%
  • Series resistor on 33% · 330 Ω (2), 4.7 kΩ (1), 33 Ω (1)
  • Pull-up to 3.3V on 33% · 2.2 kΩ (2), 10 kΩ (1), 5.1 kΩ (1)
BOOT0pin 60Connected to: Signal 100%
  • Resistor to GND on 67% · 10 kΩ (7), 5.23 kΩ (1)
  • Series resistor on 42% · 10 kΩ (4), 100 Ω (1)
PB8pin 61Connected to: A connector 50%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2), 2.2 kΩ (1), 5.1 kΩ (1)
PB9pin 62Connected to: A connector 50%
  • Pull-up to 3.3V on 50% · 10 kΩ (2), 4.7 kΩ (2), 2.2 kΩ (1)

39 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32F7 FC by rishikesh2715, VENDETTAFC by Caped-Crussader, MMDVM RPT Hat by mathisschmieder and Dreamscape-F722 by sneakylizard123-4.

The STM32F722RET6 in open source designs

The gallery holds 14 open source boards using the STM32F722RET6 from 13 GitHub repositories; a typical one measures about 42 × 42 mm and carries around 116 components.

85% use four copper layers or more, and 36% carry an open source license.

The most starred is STM32F7 FC by rishikesh2715.

Microcontrollers on boards using the STM32F722RET6

STM32F722RET6: common questions

Where can I find a STM32F722RET6 reference design?

Each of the 14 boards on this page is a real design using the STM32F722RET6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F722RET6 VBAT pin?

The VBAT pin has a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 12 open source designs using the STM32F722RET6.

How is the STM32F722RET6 PH0 pin connected?

The PH0 pin has a crystal on 12 of 12 designs, most often 8 MHz (then 16 MHz). Counted from the KiCad layouts of 12 open source designs using the STM32F722RET6.

What decoupling capacitors do designs use on the STM32F722RET6 VDD pin?

The VDD pins have a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 12 open source designs using the STM32F722RET6.

What parts are used alongside the STM32F722RET6?

The ICM-42688-P, AT7456E, USBLC6-2SC6, BMP388 and W25Q256JVEIQ appear in the most repositories here.

Which microcontrollers do boards using the STM32F722RET6 use?

Most are built on STM32 (13) and ESP32 (1).

How big is a typical board using the STM32F722RET6?

The median is 42 × 42 mm, and 15% are two-layer designs.

What is the most popular open source board using the STM32F722RET6?

By GitHub stars, STM32F7 FC by rishikesh2715, with 56 stars.

Can I simulate one of these boards using the STM32F722RET6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part