13 open source boards using the BMP581
Real designs built with the BMP581, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Watch-DevKit-HW
ZSWatch
100 × 70 mm100 parts4LGPL-3.0187
Raspberry PiInki l2
c0de111
47.2 × 55.5 mm60 parts2LApache-2.033
ESP32ESPHome-Indoor-Multi-Sensor
mikelawrence
52.5 × 59.7 mm97 parts4LCERN-OHL-P-2.012
STM32UltraHawk
InSynchronous
50 × 87 mm76 parts2LMIT2
RP2040/RP2350StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1
RP2040/RP2350Sol-Mk.-I
HIIACODER
78.2 × 46.8 mm72 parts4LMIT1
STM32Flight controller
andreadamiano
50 × 50 mm73 parts6LNo license0
ESP32Esp
akseliahonpera
86 × 75 mm61 parts2LNo license0
Raspberry PiInki
47.2 × 55.5 mm54 parts2LApache-2.033
ESP32Stencil
52.5 × 59.7 mm97 parts4LCERN-OHL-P-2.012
ESP32Esp.gnss
100 × 100 mm61 parts2LNo license0
ESP32Esp.imu pcb v1
100 × 100 mm61 parts2LNo license0
ESP32Powersupply
100 × 100 mm61 parts2LNo license0
The BMP581 in open source designs
The gallery holds 13 open source boards using the BMP581 from 8 GitHub repositories; a typical one measures about 60 × 70 mm and carries around 72 components.
54% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is Watch-DevKit-HW by ZSWatch.
Parts used alongside the BMP581
Microcontrollers on boards using the BMP581
What boards using the BMP581 are built for
BMP581: common questions
Where can I find a BMP581 reference design?
Each of the 13 boards on this page is a real design using the BMP581. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the BMP581?
The BMI270, USBLC6-2P6 and W25Q128JVSIQ appear in the most repositories here.
Which microcontrollers do boards using the BMP581 use?
Most are built on ESP32 (6), Raspberry Pi (2), RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the BMP581?
The median is 60 × 70 mm, and 54% are two-layer designs.
What is the most popular open source board using the BMP581?
By GitHub stars, Watch-DevKit-HW by ZSWatch, with 187 stars.
Can I simulate one of these boards using the BMP581 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.