6 open source boards using the INA180A2
Real designs built with the INA180A2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Gmm
GMM-7550
50 × 75 mm240 parts6LNo license36
STM32PDU
OpenSkyHawk
96.6 × 63.9 mm67 parts2LCC-BY-NC-4.03
RP2040/RP2350SAO Demo Controller
ageppert
38.1 × 50.8 mm50 parts2LMIT2
STM32McQueen
0BitsnBytes
100.5 × 101.5 mm137 parts6LGPL-3.01
STM32AstroWeather
jakubprzybytek
185 × 30 mm113 parts6LNo license1
RP2040/RP2350GMM-7550 USB3 Adapter
75 × 50 mm198 parts4LNo license36
The INA180A2 in open source designs
The gallery holds 6 open source boards using the INA180A2 from 5 GitHub repositories; a typical one measures about 85.8 × 57.3 mm and carries around 125 components.
67% use four copper layers or more, and 33% carry an open source license.
The most starred is Gmm by GMM-7550.
Microcontrollers on boards using the INA180A2
What boards using the INA180A2 are built for
INA180A2: common questions
Where can I find a INA180A2 reference design?
Each of the 6 boards on this page is a real design using the INA180A2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA180A2 use?
Most are built on STM32 (3) and RP2040/RP2350 (2).
How big is a typical board using the INA180A2?
The median is 85.8 × 57.3 mm, and 33% are two-layer designs.
What is the most popular open source board using the INA180A2?
By GitHub stars, Gmm by GMM-7550, with 36 stars.
Can I simulate one of these boards using the INA180A2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.