13 open source boards using the LTV-817S
Real designs built with the LTV-817S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
IONPAK V2
m-labs
201.2 × 84.7 mm259 parts4LNo license23
NXPRMTS-Hardware
reilleya
78.1 × 50.2 mm82 parts2LNo license14
STM32FailDeadly
yvoronkin
70 × 25 mm92 parts4LCustom license3
AVR/ArduinoInterface board
uvmaero
157.5 × 109.2 mm70 parts2LCC-BY-SA-4.03
Arduino OpenTherm shield
anway0404
68.6 × 53.3 mm45 parts2LCERN-OHL-P-2.03
Development board
inoa-io
153 × 77 mm97 parts2LCERN-OHL-P-2.02
STM32Color sensor
nevzathipertek
74 × 32 mm91 parts2LNo license1
ODROID-H3-mITX-adapter
rubenbaldewsing
170 × 170 mm59 parts4LMIT1
Nano supply
xx0x
162 × 40 mm46 parts2LCERN-OHL-P-2.01
Arduino OpenTherm shield
michpro
68.6 × 53.3 mm46 parts2LCERN-OHL-P-2.00
AVR/ArduinoDC DCBoard
185.4 × 68.6 mm65 parts2LCC-BY-SA-4.03
Metering module
86 × 31 mm35 parts2LCERN-OHL-P-2.02
Optoin
multigcs
13 × 22.5 mm6 parts2LGPL-2.091
The LTV-817S in open source designs
The gallery holds 13 open source boards using the LTV-817S from 11 GitHub repositories; a typical one measures about 86 × 53.3 mm and carries around 65 components.
77% are two-layer designs, the rest use four layers or more, and 69% carry an open source license.
The most starred is Optoin by multigcs.
Microcontrollers on boards using the LTV-817S
What boards using the LTV-817S are built for
LTV-817S: common questions
Where can I find a LTV-817S reference design?
Each of the 13 boards on this page is a real design using the LTV-817S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LTV-817S use?
Most are built on AVR/Arduino (2), STM32 (2) and NXP (1).
How big is a typical board using the LTV-817S?
The median is 86 × 53.3 mm, and 77% are two-layer designs.
What is the most popular open source board using the LTV-817S?
By GitHub stars, Optoin by multigcs, with 91 stars.
Can I simulate one of these boards using the LTV-817S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.