10 open source boards using the MC33816
Real designs built with the MC33816, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Common Rail MC33816 board
rusefi
101.6 × 119.6 mm183 parts2LGPL-3.01.2k
Common Rail MC33816 board
rusefillc
101.6 × 119.6 mm183 parts2LGPL-3.02
Common Rail MC33816 board
101.6 × 119.6 mm183 parts2LNo license2
Common Rail PT2000 board
61 × 136.5 mm168 parts2LGPL-3.01.2k
Common Rail PT2000 board
61 × 136.5 mm168 parts2LNo license2
Common Rail PT2000 board
61 × 136.5 mm168 parts2LGPL-3.02
Stimulator
101.6 × 32.4 mm150 parts2LGPL-3.01.2k
STM32GDI-4ch
164 × 118 mm303 parts4LNo license48
Stimulator
101.6 × 32.4 mm150 parts2LNo license2
Stimulator
101.6 × 32.4 mm150 parts2LGPL-3.02
The MC33816 in open source designs
The gallery holds 10 open source boards using the MC33816 from 4 GitHub repositories; a typical one measures about 101.6 × 119.6 mm and carries around 168 components.
90% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Common Rail MC33816 board by rusefi.
Parts used alongside the MC33816
Microcontrollers on boards using the MC33816
MC33816: common questions
Where can I find a MC33816 reference design?
Each of the 10 boards on this page is a real design using the MC33816. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MC33816?
The AMS1117-3.3, MAX232 and MCP42010 appear in the most repositories here.
Which microcontrollers do boards using the MC33816 use?
Most are built on STM32 (1).
How big is a typical board using the MC33816?
The median is 101.6 × 119.6 mm, and 90% are two-layer designs.
What is the most popular open source board using the MC33816?
By GitHub stars, Common Rail MC33816 board by rusefi, with 1,177 stars.
Can I simulate one of these boards using the MC33816 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.