4 open source boards using the MCP6002
Real designs built with the MCP6002, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FunBox
GuitarML
59.7 × 67.5 mm63 parts2LMIT278
RP2040/RP23504HPico
rheslip
20.3 × 110 mm71 parts2LNo license82
NXPRawWaves
SherpaModular
20 × 107 mm55 parts2LNo license26
RP2040/RP2350Pico 2HP Audio
70 × 30.3 mm57 parts2LNo license82
The MCP6002 in open source designs
The gallery holds 4 open source boards using the MCP6002 from 3 GitHub repositories; a typical one measures about 40 × 87.3 mm and carries around 60 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is FunBox by GuitarML.
Parts used alongside the MCP6002
Microcontrollers on boards using the MCP6002
What boards using the MCP6002 are built for
MCP6002: common questions
Where can I find a MCP6002 reference design?
Each of the 4 boards on this page is a real design using the MCP6002. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6002 use?
Most are built on RP2040/RP2350 (2) and NXP (1).
How big is a typical board using the MCP6002?
The median is 40 × 87.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP6002?
By GitHub stars, FunBox by GuitarML, with 278 stars.
Can I simulate one of these boards using the MCP6002 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.