9 open source boards using the MCP6002-XSN
Real designs built with the MCP6002-XSN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
4mix
bread-modular
91.4 × 68.6 mm167 parts4LMIT65
Daisy hardware v1
rafkhan
50.5 × 128.3 mm110 parts4LNo license9
ESP3232bit
30.5 × 68.6 mm62 parts4LMIT65
RP2040/RP235016bit
30.5 × 68.6 mm58 parts2LMIT65
Imix
30.5 × 68.6 mm58 parts4LMIT65
AVR/ArduinoHihat
30.5 × 68.6 mm52 parts2LMIT65
Kick
30.5 × 68.6 mm35 parts4LMIT65
Svf
30.5 × 68.6 mm34 parts2LMIT65
AVR/ArduinoEnv
30.5 × 68.6 mm29 parts2LMIT65
The MCP6002-XSN in open source designs
The gallery holds 9 open source boards using the MCP6002-XSN from 2 GitHub repositories; a typical one measures about 30.5 × 68.6 mm and carries around 58 components.
56% use four copper layers or more, and 89% carry an open source license.
The most starred is 4mix by bread-modular.
Microcontrollers on boards using the MCP6002-XSN
What boards using the MCP6002-XSN are built for
MCP6002-XSN: common questions
Where can I find a MCP6002-XSN reference design?
Each of the 9 boards on this page is a real design using the MCP6002-XSN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6002-XSN use?
Most are built on AVR/Arduino (2), RP2040/RP2350 (1) and ESP32 (1).
How big is a typical board using the MCP6002-XSN?
The median is 30.5 × 68.6 mm, and 44% are two-layer designs.
What is the most popular open source board using the MCP6002-XSN?
By GitHub stars, 4mix by bread-modular, with 65 stars.
Can I simulate one of these boards using the MCP6002-XSN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.