3 open source boards using the MIC23250-S4YMT
Real designs built with the MIC23250-S4YMT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGASd2snes
mrehkopf
101.5 × 83 mm147 partsGPL-2.0717
FPGASd2snes
magnotrans
101.5 × 83 mm147 partsGPL-2.04
FPGASd2snes
dfederspiel
101.5 × 83 mm147 partsGPL-2.02
The MIC23250-S4YMT in open source designs
The gallery holds 3 open source boards using the MIC23250-S4YMT from 3 GitHub repositories; a typical one measures about 101.5 × 83 mm and carries around 147 components.
100% carry an open source license.
The most starred is Sd2snes by mrehkopf.
Parts used alongside the MIC23250-S4YMT
Microcontrollers on boards using the MIC23250-S4YMT
What boards using the MIC23250-S4YMT are built for
MIC23250-S4YMT: common questions
Where can I find a MIC23250-S4YMT reference design?
Each of the 3 boards on this page is a real design using the MIC23250-S4YMT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MIC23250-S4YMT?
The 74ALVC164245DGG, CS4344, CY62148EV30-ZSXI, LPC1754 and MCP1824-1802E/OT appear in the most repositories here.
Which microcontrollers do boards using the MIC23250-S4YMT use?
Most are built on FPGA (3).
How big is a typical board using the MIC23250-S4YMT?
The median is 101.5 × 83 mm.
What is the most popular open source board using the MIC23250-S4YMT?
By GitHub stars, Sd2snes by mrehkopf, with 717 stars.
Can I simulate one of these boards using the MIC23250-S4YMT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.