9 open source boards using the MP1584EN
Real designs built with the MP1584EN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32PCB V2
BhoumikAcharya
94.5 × 75.6 mm161 parts2LNo license1
ESP32Dongle eaLIVE
joaogabrielsantosD
45 × 55 mm69 parts2LNo license1
AVR/ArduinoT12 SolderingStation
Cube-Line
80 × 23 mm52 parts2LNo license1- schematic only · 38 parts
Epicura spec
manasXP
38 partsNo license1 
Power-Loss-Heat-Creep-Arrester
deogratius2phantom
62 × 41 mm48 parts2LCC0-1.00
ESP8266Smart-Home-Zisternen-Pegelmessung
Pytonballoon810
70 × 60 mm8 parts2LNo license0
AVR/ArduinoArduino nano with battery integration
Chirag-Vadrali
79.5 × 35.7 mm90 parts4LNo license1
ESP8266-Breakdown Board
87.5 × 65 mm60 parts2LNo license1
BuckMP1584
19.6 × 23.8 mm18 parts2LNo license1
The MP1584EN in open source designs
The gallery holds 9 open source boards using the MP1584EN from 7 GitHub repositories; a typical one measures about 74.8 × 48 mm and carries around 52 components.
88% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is PCB V2 by BhoumikAcharya.
Parts used alongside the MP1584EN
Microcontrollers on boards using the MP1584EN
What boards using the MP1584EN are built for
MP1584EN: common questions
Where can I find a MP1584EN reference design?
Each of the 9 boards on this page is a real design using the MP1584EN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MP1584EN use?
Most are built on AVR/Arduino (2), ESP32 (2) and ESP8266 (1).
How big is a typical board using the MP1584EN?
The median is 74.8 × 48 mm, and 88% are two-layer designs.
What is the most popular open source board using the MP1584EN?
By GitHub stars, PCB V2 by BhoumikAcharya, with 1 stars.
Can I simulate one of these boards using the MP1584EN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.