3 open source boards using the MT45W8MW16
Real designs built with the MT45W8MW16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGASd2snes
mrehkopf
101.5 × 83 mm147 partsGPL-2.0717
FPGASd2snes
magnotrans
101.5 × 83 mm147 partsGPL-2.04
FPGASd2snes
dfederspiel
101.5 × 83 mm147 partsGPL-2.02
The MT45W8MW16 in open source designs
The gallery holds 3 open source boards using the MT45W8MW16 from 3 GitHub repositories; a typical one measures about 101.5 × 83 mm and carries around 147 components.
100% carry an open source license.
The most starred is Sd2snes by mrehkopf.
Parts used alongside the MT45W8MW16
Microcontrollers on boards using the MT45W8MW16
What boards using the MT45W8MW16 are built for
MT45W8MW16: common questions
Where can I find a MT45W8MW16 reference design?
Each of the 3 boards on this page is a real design using the MT45W8MW16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MT45W8MW16?
The 74ALVC164245DGG, CS4344, CY62148EV30-ZSXI, LPC1754 and MCP1824-1802E/OT appear in the most repositories here.
Which microcontrollers do boards using the MT45W8MW16 use?
Most are built on FPGA (3).
How big is a typical board using the MT45W8MW16?
The median is 101.5 × 83 mm.
What is the most popular open source board using the MT45W8MW16?
By GitHub stars, Sd2snes by mrehkopf, with 717 stars.
Can I simulate one of these boards using the MT45W8MW16 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.