9 open source boards using the RP2350_80QFN
Real designs built with the RP2350_80QFN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350MMM main
niektb
40 × 110 mm145 parts4LCC-BY-SA-4.034
RP2040/RP2350VNTR-65
FanieVenter
370 × 120 mm126 parts2LNo license1
RP2040/RP2350RP2350B-RM2-module
Pico-Framework
33.7 × 68.9 mm61 parts4LMIT1
RP2040/RP2350Alvestav lee thesis project-2025
alvestav
99.4 × 99.4 mm166 parts2LMIT0
RP2040/RP2350UnIC
andrastantos
50 × 15.2 mm193 parts4LNo license6
RP2040/RP2350Dev board
iamdarshg
100 × 50 mm172 parts4LNo license1
RP2040/RP2350Backup
ItsShadowCone
125.5 × 116.7 mm122 parts2LNo license0
RP2040/RP2350Transparent one
275 × 200 mm79 parts2LNo license0
RP2040/RP2350RP2350B QFN-80 Minimal Design Example
52 × 71.5 mm45 parts2LNo license0
The RP2350_80QFN in open source designs
The gallery holds 9 open source boards using the RP2350_80QFN from 7 GitHub repositories; a typical one measures about 99.4 × 99.4 mm and carries around 126 components.
56% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is MMM main by niektb.
Parts used alongside the RP2350_80QFN
Microcontrollers on boards using the RP2350_80QFN
What boards using the RP2350_80QFN are built for
RP2350_80QFN: common questions
Where can I find a RP2350_80QFN reference design?
Each of the 9 boards on this page is a real design using the RP2350_80QFN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RP2350_80QFN use?
Most are built on RP2040/RP2350 (9).
How big is a typical board using the RP2350_80QFN?
The median is 99.4 × 99.4 mm, and 56% are two-layer designs.
What is the most popular open source board using the RP2350_80QFN?
By GitHub stars, MMM main by niektb, with 34 stars.
Can I simulate one of these boards using the RP2350_80QFN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.