9 open source boards using the SC0914(13)
Real designs built with the SC0914(13), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350PD240W
theohg
66 × 66 mm213 parts6LCC-BY-NC-4.0116
RP2040/RP2350Riotee Board
NessieCircuits
55.9 × 22.9 mm80 parts4LCERN-OHL-W-2.015
RP2040/RP2350Gemini
0xCB-dev
18 × 23.3 mm50 parts4LCustom license11
RP2040/RP2350Spasics
psychogenic
45 × 30 mm66 parts4LGPL-3.010
RP2040/RP2350Master board
roboryman
156 × 156 mm66 parts2LMIT9
RP2040/RP2350BMS
AerospaceNU
100 × 100 mm342 parts6LNo license4
RP2040/RP2350TimeCapsule
jaxfry
50 × 70 mm51 parts2LNo license0
RP2040/RP2350HandyWork 5x3 + Mods + Nav
AxelVoitier
283.2 × 131.5 mm48 parts4LNo license70
RP2040/RP2350Gemini panel
112 × 70.6 mm50 parts4LCustom license11
The SC0914(13) in open source designs
The gallery holds 9 open source boards using the SC0914(13) from 8 GitHub repositories; a typical one measures about 66 × 70 mm and carries around 66 components.
78% use four copper layers or more, and 33% carry an open source license.
The most starred is PD240W by theohg.
Parts used alongside the SC0914(13)
Microcontrollers on boards using the SC0914(13)
What boards using the SC0914(13) are built for
SC0914(13): common questions
Where can I find a SC0914(13) reference design?
Each of the 9 boards on this page is a real design using the SC0914(13). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SC0914(13)?
The AP2112K-3.3TRG1, W25Q128JVPIQ, W25Q128JVSIQ TR and W25Q16JVUXIQ appear in the most repositories here.
Which microcontrollers do boards using the SC0914(13) use?
Most are built on RP2040/RP2350 (9).
How big is a typical board using the SC0914(13)?
The median is 66 × 70 mm, and 22% are two-layer designs.
What is the most popular open source board using the SC0914(13)?
By GitHub stars, PD240W by theohg, with 116 stars.
Can I simulate one of these boards using the SC0914(13) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.