4 open source boards using the STM32H743ZIT6
Real designs built with the STM32H743ZIT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32SmartPrintCoreH7x
BoltzRnD
170.1 × 96.9 mm530 parts2LGPL-3.087
STM32Shirley-FC-Dev-Board
Bare-Metal-Foundry
56 × 46 mm110 parts4LNo license29
ESP32OpenAirScope
emertcakir
100 × 75 mm247 parts4LMIT26
STM32Hagent
changgeruoxiao
85 × 65 mm71 parts4LMIT0
The STM32H743ZIT6 in open source designs
The gallery holds 4 open source boards using the STM32H743ZIT6 from 4 GitHub repositories; a typical one measures about 92.5 × 70 mm and carries around 179 components.
75% use four copper layers or more, and 75% carry an open source license.
The most starred is SmartPrintCoreH7x by BoltzRnD.
Parts used alongside the STM32H743ZIT6
What boards using the STM32H743ZIT6 are built for
STM32H743ZIT6: common questions
Where can I find a STM32H743ZIT6 reference design?
Each of the 4 boards on this page is a real design using the STM32H743ZIT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32H743ZIT6 use?
Most are built on STM32 (3) and ESP32 (1).
How big is a typical board using the STM32H743ZIT6?
The median is 92.5 × 70 mm, and 25% are two-layer designs.
What is the most popular open source board using the STM32H743ZIT6?
By GitHub stars, SmartPrintCoreH7x by BoltzRnD, with 87 stars.
Can I simulate one of these boards using the STM32H743ZIT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.