4 open source boards using the VL53L1CXV0FY/1
Real designs built with the VL53L1CXV0FY/1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAZynq
juliancoy
120 × 60 mm295 partsMIT74
AVR/ArduinoEUPLA CONE CORE
PineConeMechatronics
76.2 × 54 mm95 parts2LCERN-OHL-P-2.01
ESP32Cube hologram
Honzaaa45
48 × 52 mm55 parts4LMIT0
Smartbag optics
claudiofin
134 × 12 mm13 parts2LMIT0
The VL53L1CXV0FY/1 in open source designs
The gallery holds 4 open source boards using the VL53L1CXV0FY/1 from 4 GitHub repositories; a typical one measures about 98.1 × 53 mm and carries around 75 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is ZynqPCB by juliancoy.
Microcontrollers on boards using the VL53L1CXV0FY/1
What boards using the VL53L1CXV0FY/1 are built for
VL53L1CXV0FY/1: common questions
Where can I find a VL53L1CXV0FY/1 reference design?
Each of the 4 boards on this page is a real design using the VL53L1CXV0FY/1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the VL53L1CXV0FY/1 use?
Most are built on AVR/Arduino (1), ESP32 (1) and FPGA (1).
How big is a typical board using the VL53L1CXV0FY/1?
The median is 98.1 × 53 mm, and 67% are two-layer designs.
What is the most popular open source board using the VL53L1CXV0FY/1?
By GitHub stars, ZynqPCB by juliancoy, with 74 stars.
Can I simulate one of these boards using the VL53L1CXV0FY/1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.