15 open source boards using the VL53L1CXV0FY/1
Real designs built with the VL53L1CXV0FY/1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Zynq
juliancoy
120 × 60 mm295 partsMIT75AVR/Arduino
EUPLA CONE CORE
PineConeMechatronics
76.2 × 54 mm95 parts2LCERN-OHL-P-2.01FPGA
NeuraCore
NeuraCoreTech
120 × 60 mm295 parts8LNo license0RP2040/RP2350
AirNote
JesseLevine727
90 × 70 mm58 parts4LNo license0ESP32
Cube hologram
Honzaaa45
48 × 52 mm55 parts4LMIT0Iris brow
HeyPCB
116 × 12 mm16 parts2LCERN-OHL-S-2.00RP2040/RP2350
Airnote routing pass1
JesseLevine727
90 × 70 mm58 parts4LNo license0Smartbag optics
claudiofin
134 × 12 mm13 parts2LMIT0RP2040/RP2350
Before final bypass
JesseLevine727
90 × 70 mm58 parts4LNo license0Bottom asm
Engineer162
22 × 13 mm8 parts2LCERN-OHL-S-2.00RP2040/RP2350
Before manual repair
JesseLevine727
90 × 70 mm58 parts4LNo license0RP2040/RP2350
Bypass clean before c5
JesseLevine727
90 × 70 mm58 parts4LNo license0RP2040/RP2350
Bypass clean before shorter-22
JesseLevine727
90 × 70 mm58 parts4LNo license0RP2040/RP2350
Local prewired
JesseLevine727
90 × 70 mm58 parts4LNo license0ESP32
Esp32 vl53l1x
HeyPCB
30 × 48 mm25 parts4LCERN-OHL-S-2.00
How designs wire the VL53L1CXV0FY/1
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the VL53L1CXV0FY/1 connects to, and the resistors, capacitors and other passives placed on it.
- The AVDDVCSEL pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 4.7 µF).
- The XSHUT pin has a pull-up to 3.3V on 7 of 9 designs, most often 10 kΩ.
- The SDA pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 10 kΩ).
- The SCL pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| AVDDVCSELpin 1 | Connected to: 3.3V 100% |
|
| AVSSVCSELpin 2 | Connected to: GND 100% | — |
| GNDpin 3, 4, 6, 12 | Connected to: GND 100% | — |
| XSHUTpin 5 | Connected to: A connector 22%, the microcontroller 22% |
|
| GPIO1pin 7 | Connected to: The microcontroller 44%, a connector 22% · not connected 33% |
|
| DNCpin 8 | Connected to: Not connected 100% | — |
| SDApin 9 | Connected to: A connector 56%, the microcontroller 33%, APDS-9960 22% |
|
| SCLpin 10 | Connected to: A connector 56%, the microcontroller 33%, APDS-9960 22% |
|
| AVDDpin 11 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ZynqPCB by juliancoy, EUPLA CONE CORE by PineConeMechatronics, Smartbag optics by claudiofin and Bottom asm by Engineer162.
The VL53L1CXV0FY/1 in open source designs
The gallery holds 15 open source boards using the VL53L1CXV0FY/1 from 9 GitHub repositories; a typical one measures about 90 × 60 mm and carries around 58 components.
71% use four copper layers or more, and 47% carry an open source license.
The most starred is ZynqPCB by juliancoy.
Parts used alongside the VL53L1CXV0FY/1
Microcontrollers on boards using the VL53L1CXV0FY/1
What boards using the VL53L1CXV0FY/1 are built for
VL53L1CXV0FY/1: common questions
Where can I find a VL53L1CXV0FY/1 reference design?
Each of the 15 boards on this page is a real design using the VL53L1CXV0FY/1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the VL53L1CXV0FY/1 AVDDVCSEL pin?
The AVDDVCSEL pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the VL53L1CXV0FY/1.
What pull-up resistor is used on the VL53L1CXV0FY/1 XSHUT pin?
The XSHUT pin has a pull-up to 3.3V on 7 of 9 designs, most often 10 kΩ. Counted from the KiCad layouts of 9 open source designs using the VL53L1CXV0FY/1.
What pull-up resistor is used on the VL53L1CXV0FY/1 SDA pin?
The SDA pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 9 open source designs using the VL53L1CXV0FY/1.
What parts are used alongside the VL53L1CXV0FY/1?
The AP2112K-3.3TRG1, APDS-9960, LSM6DSLTR, MAX98357AETE+T and S25FL256SAGNFI001 appear in the most repositories here.
Which microcontrollers do boards using the VL53L1CXV0FY/1 use?
Most are built on RP2040/RP2350 (7), ESP32 (2), FPGA (2) and AVR/Arduino (1).
How big is a typical board using the VL53L1CXV0FY/1?
The median is 90 × 60 mm, and 29% are two-layer designs.
What is the most popular open source board using the VL53L1CXV0FY/1?
By GitHub stars, ZynqPCB by juliancoy, with 75 stars.
Can I simulate one of these boards using the VL53L1CXV0FY/1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.