3 open source boards using the 100U

Real designs built with the 100U, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The 100U in open source designs

The gallery holds 3 open source boards using the 100U from 3 GitHub repositories; a typical one measures about 35 × 53 mm and carries around 53 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is GPS-Tracker by mohamedboubaker.

Microcontrollers on boards using the 100U

What boards using the 100U are built for

100U: common questions

Where can I find a 100U reference design?

Each of the 3 boards on this page is a real design using the 100U. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 100U?

The 100N, 10N, 10P, 10U and 1u appear in the most repositories here.

Which microcontrollers do boards using the 100U use?

Most are built on STM32 (3).

How big is a typical board using the 100U?

The median is 35 × 53 mm, and 100% are two-layer designs.

What is the most popular open source board using the 100U?

By GitHub stars, GPS-Tracker by mohamedboubaker, with 40 stars.

Can I simulate one of these boards using the 100U before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part