5 open source boards using the 114993390
Real designs built with the 114993390, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
IRIS
codinga593
80 × 80 mm129 parts6LNo license1STM32
Forte
codinga593
50 × 60 mm60 parts4LNo license1CanSat Devboard
NBER08
64.1 × 43.6 mm44 parts4LMIT0SX1262-Devboard
NBER08
64.4 × 38.1 mm43 parts2LCERN-OHL-S-2.00ESP32
CM5IO top
Distaff
50.3 × 56.3 mm48 parts2LMIT1
How designs wire the 114993390
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 114993390 connects to, and the resistors, capacitors and other passives placed on it.
- The ANT pin is left unconnected on 5 of 5 designs.
- The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 10 µF).
- The DIO1 pin is left unconnected on 3 of 5 designs (a signal on 2).
- The NSS pin has a pull-up to 3.3V on 2 of 5 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NSSpin 6 | Connected to: The microcontroller 60%, E73-2G4M08S1C 40% |
|
| GND_1pin 7 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
| ANTpin 9 | Connected to: Not connected 100% | — |
| GND_2pin 10 | Connected to: GND 100% | — |
| DIO1pin 12 | Connected to: Not connected 60% · a signal 40% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Forte by codinga593, IRIS by codinga593, CM5IO top by Distaff and CanSat Devboard by NBER08.
The 114993390 in open source designs
The gallery holds 5 open source boards using the 114993390 from 5 GitHub repositories; a typical one measures about 64.1 × 56.3 mm and carries around 48 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is IRIS by codinga593.
Parts used alongside the 114993390
What boards using the 114993390 are built for
114993390: common questions
Where can I find a 114993390 reference design?
Each of the 5 boards on this page is a real design using the 114993390. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 114993390 ANT pin connected?
The ANT pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 114993390.
What decoupling capacitors do designs use on the 114993390 VCC pin?
The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the 114993390.
How is the 114993390 DIO1 pin connected?
The DIO1 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 114993390.
What parts are used alongside the 114993390?
The E73-2G4M08S1C, MAX-M10S-00B, MS5611-01BA, SRV05-4 and TPS54525PWPR appear in the most repositories here.
Which microcontrollers do boards using the 114993390 use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the 114993390?
The median is 64.1 × 56.3 mm, and 40% are two-layer designs.
What is the most popular open source board using the 114993390?
By GitHub stars, IRIS by codinga593, with 1 stars.
Can I simulate one of these boards using the 114993390 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.