2 open source boards using the 12v input

Real designs built with the 12v input, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The 12v input in open source designs

The gallery holds 2 open source boards using the 12v input from 2 GitHub repositories; a typical one measures about 60 × 62.5 mm and carries around 57 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Brushless board by robotronik.

Microcontrollers on boards using the 12v input

What boards using the 12v input are built for

12v input: common questions

Where can I find a 12v input reference design?

Each of the 2 boards on this page is a real design using the 12v input. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 12v input?

The 5v input, DEC24/2, MCP1702, MCP2562 and STM32F042K6TX appear in the most repositories here.

Which microcontrollers do boards using the 12v input use?

Most are built on STM32 (2).

How big is a typical board using the 12v input?

The median is 60 × 62.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the 12v input?

By GitHub stars, Brushless board by robotronik, with 1 stars.

Can I simulate one of these boards using the 12v input before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part