3 open source boards using the 5v input
Real designs built with the 5v input, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Autonomous seed planting robot
HusseinAlwali
81.6 × 144.1 mm25 parts2LMIT0STM32
Brushless board
robotronik
60 × 62.5 mm57 parts2LNo license1STM32
Brushless board
robotronik
60 × 62.5 mm57 parts2LNo license1
The 5v input in open source designs
The gallery holds 3 open source boards using the 5v input from 3 GitHub repositories; a typical one measures about 60 × 62.5 mm and carries around 57 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Brushless board by robotronik.
Parts used alongside the 5v input
What boards using the 5v input are built for
5v input: common questions
Where can I find a 5v input reference design?
Each of the 3 boards on this page is a real design using the 5v input. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 5v input?
The 12v input, DEC24/2, MCP1702, MCP2562 and STM32F042K6TX appear in the most repositories here.
Which microcontrollers do boards using the 5v input use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the 5v input?
The median is 60 × 62.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the 5v input?
By GitHub stars, Brushless board by robotronik, with 1 stars.
Can I simulate one of these boards using the 5v input before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.