2 open source boards using the DEC24/2

Real designs built with the DEC24/2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The DEC24/2 in open source designs

The gallery holds 2 open source boards using the DEC24/2 from 2 GitHub repositories; a typical one measures about 60 × 62.5 mm and carries around 57 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Brushless board by robotronik.

Microcontrollers on boards using the DEC24/2

What boards using the DEC24/2 are built for

DEC24/2: common questions

Where can I find a DEC24/2 reference design?

Each of the 2 boards on this page is a real design using the DEC24/2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the DEC24/2?

The 12v input, 5v input, MCP1702, MCP2562 and STM32F042K6TX appear in the most repositories here.

Which microcontrollers do boards using the DEC24/2 use?

Most are built on STM32 (2).

How big is a typical board using the DEC24/2?

The median is 60 × 62.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the DEC24/2?

By GitHub stars, Brushless board by robotronik, with 1 stars.

Can I simulate one of these boards using the DEC24/2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part