6 open source boards using the 157112V12700

Real designs built with the 157112V12700, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 157112V12700

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 157112V12700 connects to, and the resistors, capacitors and other passives placed on it.

  • The E pin has a series resistor on 6 of 6 designs, most often 68 Ω (then 510 Ω).
  • The D pin has a series resistor on 6 of 6 designs, most often 68 Ω (then 510 Ω).
  • The C pin has a series resistor on 6 of 6 designs, most often 68 Ω (then 510 Ω).
  • The DP pin has a series resistor on 6 of 6 designs, most often 68 Ω (then 510 Ω).
Epin 1Connected to: Signal 100%
  • Series resistor on 100% · 68 Ω (4), 510 Ω (2)
Dpin 2Connected to: Signal 100%
  • Series resistor on 100% · 68 Ω (4), 510 Ω (2)
CCpin 3, 8Connected to: GND 100%
Cpin 4Connected to: Signal 100%
  • Series resistor on 100% · 68 Ω (4), 510 Ω (2)
DPpin 5Connected to: Signal 100%
  • Series resistor on 100% · 68 Ω (4), 510 Ω (2)
Bpin 6Connected to: Signal 100%
  • Series resistor on 100% · 68 Ω (4), 510 Ω (2)
Apin 7Connected to: Signal 100%
  • Series resistor on 100% · 68 Ω (4), 510 Ω (2)
Fpin 9Connected to: Signal 100%
  • Series resistor on 100% · 68 Ω (4), 510 Ω (2)
Gpin 10Connected to: Signal 100%
  • Series resistor on 100% · 68 Ω (4), 510 Ω (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TinyTapeout 4+ Demoboard by claynicholson, Tt123-demo pcb by TinyTapeout, Chipignite discover by efabless and Kicad demos tiny tapeout by circuitly.

The 157112V12700 in open source designs

The gallery holds 6 open source boards using the 157112V12700 from 6 GitHub repositories; a typical one measures about 104.5 × 81 mm and carries around 131 components.

83% use four copper layers or more, and 67% carry an open source license.

The most starred is TinyTapeout 4+ Demoboard by claynicholson.

Microcontrollers on boards using the 157112V12700

What boards using the 157112V12700 are built for

157112V12700: common questions

Where can I find a 157112V12700 reference design?

Each of the 6 boards on this page is a real design using the 157112V12700. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 157112V12700 E pin?

The E pin has a series resistor on 6 of 6 designs, most often 68 Ω (then 510 Ω). Counted from the KiCad layouts of 6 open source designs using the 157112V12700.

What resistor goes on the 157112V12700 D pin?

The D pin has a series resistor on 6 of 6 designs, most often 68 Ω (then 510 Ω). Counted from the KiCad layouts of 6 open source designs using the 157112V12700.

What resistor goes on the 157112V12700 C pin?

The C pin has a series resistor on 6 of 6 designs, most often 68 Ω (then 510 Ω). Counted from the KiCad layouts of 6 open source designs using the 157112V12700.

What parts are used alongside the 157112V12700?

The TLV1117LV33DCYR, W25Q32JVSSIQ, SC0914(13), 74CBTLV3257PW,118 and AP2112K-1.8TRG1 appear in the most repositories here.

Which microcontrollers do boards using the 157112V12700 use?

Most are built on RP2040/RP2350 (6).

How big is a typical board using the 157112V12700?

The median is 104.5 × 81 mm, and 17% are two-layer designs.

What is the most popular open source board using the 157112V12700?

By GitHub stars, TinyTapeout 4+ Demoboard by claynicholson, with 102 stars.

Can I simulate one of these boards using the 157112V12700 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part