6 open source boards using the 74CBTLV3257PW,118

Real designs built with the 74CBTLV3257PW,118, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74CBTLV3257PW,118

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74CBTLV3257PW,118 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • Pin 11 has a resistor to GND on 5 of 6 designs, most often 10 kΩ (then 1 kΩ).
  • The OE pin is tied to GND on 5 of 6 designs.
  • Pin 2 has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
Spin 1Connected to: Signal 100%
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
Pin 2Connected to: A connector 83% · not connected 17%
  • Pull-up to 3.3V on 67% · 10 kΩ (4)
GNDpin 8Connected to: GND 100%
Pin 11Connected to: A connector 83%
  • Resistor to GND on 83% · 10 kΩ (4), 1 kΩ (1)
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
OEpin 15Connected to: GND 83% · a signal 17%
VCCpin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (10), 1 µF (5), 10 nF (1)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TinyTapeout 4+ Demoboard by claynicholson, Spasics by psychogenic, Motherboard by morzack and Kicad demos tiny tapeout by circuitly.

The 74CBTLV3257PW,118 in open source designs

The gallery holds 6 open source boards using the 74CBTLV3257PW,118 from 6 GitHub repositories; a typical one measures about 104.5 × 81 mm and carries around 131 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is TinyTapeout 4+ Demoboard by claynicholson.

Microcontrollers on boards using the 74CBTLV3257PW,118

What boards using the 74CBTLV3257PW,118 are built for

74CBTLV3257PW,118: common questions

Where can I find a 74CBTLV3257PW,118 reference design?

Each of the 6 boards on this page is a real design using the 74CBTLV3257PW,118. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74CBTLV3257PW,118 VCC pin?

The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the 74CBTLV3257PW,118.

What resistor goes on the 74CBTLV3257PW,118 pin 11?

Pin 11 has a resistor to GND on 5 of 6 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the 74CBTLV3257PW,118.

How is the 74CBTLV3257PW,118 OE pin connected?

The OE pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 74CBTLV3257PW,118.

What parts are used alongside the 74CBTLV3257PW,118?

The AP2112K-1.8TRG1, SC0914(13), W25Q32JVSSIQ, 157112V12700 and TLV1117LV33DCYR appear in the most repositories here.

Which microcontrollers do boards using the 74CBTLV3257PW,118 use?

Most are built on RP2040/RP2350 (5).

How big is a typical board using the 74CBTLV3257PW,118?

The median is 104.5 × 81 mm, and 0% are two-layer designs.

What is the most popular open source board using the 74CBTLV3257PW,118?

By GitHub stars, TinyTapeout 4+ Demoboard by claynicholson, with 102 stars.

Can I simulate one of these boards using the 74CBTLV3257PW,118 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part