5 open source boards using the 40PIN_Breakout

Real designs built with the 40PIN_Breakout, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 40PIN_Breakout

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 40PIN_Breakout connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 12 has a series capacitor on 5 of 5 designs, most often 100 nF.
  • Pin 39 is tied to GND on 5 of 5 designs.
  • Pin 40 is tied to 5V on 5 of 5 designs.
Pin 12Connected to: A connector 100%
  • Series capacitor on 100% · 100 nF (5)
Pin 39Connected to: GND 100%
Pin 40Connected to: 5V 100%

37 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCU BaseBoard by ExploreEmbedded, MCU BaseBoard by ExploreEmbedded, MCU BaseBoard by AhmedElwakeel and MCU BaseBoard by ExploreEmbedded.

The 40PIN_Breakout in open source designs

The gallery holds 5 open source boards using the 40PIN_Breakout from 5 GitHub repositories; a typical one measures about 180 × 125 mm and carries around 146 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is MCU BaseBoard by ExploreEmbedded.

Parts used alongside the 40PIN_Breakout

40PIN_Breakout: common questions

Where can I find a 40PIN_Breakout reference design?

Each of the 5 boards on this page is a real design using the 40PIN_Breakout. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 40PIN_Breakout pin 12 connected?

Pin 12 has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 40PIN_Breakout.

How is the 40PIN_Breakout pin 39 connected?

Pin 39 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 40PIN_Breakout.

How is the 40PIN_Breakout pin 40 connected?

Pin 40 is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 40PIN_Breakout.

What parts are used alongside the 40PIN_Breakout?

The 24C16, 7805, DS1307, L293D and LCD-jhd12864e-xl appear in the most repositories here.

How big is a typical board using the 40PIN_Breakout?

The median is 180 × 125 mm, and 100% are two-layer designs.

What is the most popular open source board using the 40PIN_Breakout?

By GitHub stars, MCU BaseBoard by ExploreEmbedded, with 25 stars.

Can I simulate one of these boards using the 40PIN_Breakout before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part