6 open source boards using the LCD-jhd12864e-xl
Real designs built with the LCD-jhd12864e-xl, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license25MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license17MCU BaseBoard
AhmedElwakeel
180 × 125 mm146 parts2LNo license1OneMicro-Base-Board
ExploreEmbedded
180 × 135 mm143 parts2LNo license1MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license0MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license0
How designs wire the LCD-jhd12864e-xl
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LCD-jhd12864e-xl connects to, and the resistors, capacitors and other passives placed on it.
- Pin 20 has a resistor to GND on 6 of 6 designs, most often 2.2 kΩ.
- Pin 1 is tied to GND on 6 of 6 designs.
- Pin 2 is tied to 5V on 6 of 6 designs.
- Pin 17 is tied to 5V on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 100% | — |
| Pin 2 | Connected to: 5V 100% | — |
| Pin 17 | Connected to: 5V 100% | — |
| Pin 19 | Connected to: 5V 100% | — |
| Pin 20 | Connected to: Signal 100% |
|
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCU BaseBoard by ExploreEmbedded, MCU BaseBoard by ExploreEmbedded, MCU BaseBoard by AhmedElwakeel and OneMicro-Base-Board by ExploreEmbedded.
The LCD-jhd12864e-xl in open source designs
The gallery holds 6 open source boards using the LCD-jhd12864e-xl from 6 GitHub repositories; a typical one measures about 180 × 125 mm and carries around 146 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is MCU BaseBoard by ExploreEmbedded.
LCD-jhd12864e-xl: common questions
Where can I find a LCD-jhd12864e-xl reference design?
Each of the 6 boards on this page is a real design using the LCD-jhd12864e-xl. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LCD-jhd12864e-xl pin 20?
Pin 20 has a resistor to GND on 6 of 6 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 6 open source designs using the LCD-jhd12864e-xl.
How is the LCD-jhd12864e-xl pin 1 connected?
Pin 1 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LCD-jhd12864e-xl.
How is the LCD-jhd12864e-xl pin 2 connected?
Pin 2 is tied to 5V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LCD-jhd12864e-xl.
What parts are used alongside the LCD-jhd12864e-xl?
The 24C16, DS1307, L293D, LM1117 and 40PIN_Breakout appear in the most repositories here.
How big is a typical board using the LCD-jhd12864e-xl?
The median is 180 × 125 mm, and 100% are two-layer designs.
What is the most popular open source board using the LCD-jhd12864e-xl?
By GitHub stars, MCU BaseBoard by ExploreEmbedded, with 25 stars.
Can I simulate one of these boards using the LCD-jhd12864e-xl before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.