7 open source boards using the 74AC00
Real designs built with the 74AC00, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Mainboard
c0pperdragon
88.9 × 88.9 mm42 parts2LNo license20Z80DevBoard
dbuchwald
101.6 × 83.8 mm36 parts2LMIT3ESP32
Serrasoid TRX 29M
kazushinjo
170 × 150 mm328 parts4LGPL-3.00Raspberry Pi
Clementina hardware
fran150
172.7 × 108.6 mm42 parts2LGPL-3.00RP2040/RP2350
Rp6502
clintonimaroo
150 × 100 mm50 parts2LNo license065c816board
c0pperdragon
30.5 × 88.9 mm9 parts2LNo license20VGA
John-Lluch
150 × 80 mm107 parts4LNo license10
How designs wire the 74AC00
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74AC00 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 22 nF).
- Pin 11 is left unconnected on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 100% | — |
| Pin 11 | Connected to: Not connected 67% · a signal 33% | — |
| VCCpin 14 | Connected to: 5V 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 65c816board by c0pperdragon, VGA by John-Lluch, Z80DevBoard by dbuchwald and Rp6502 by clintonimaroo.
The 74AC00 in open source designs
The gallery holds 7 open source boards using the 74AC00 from 6 GitHub repositories; a typical one measures about 150 × 88.9 mm and carries around 42 components.
71% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Mainboard by c0pperdragon.
Microcontrollers on boards using the 74AC00
What boards using the 74AC00 are built for
74AC00: common questions
Where can I find a 74AC00 reference design?
Each of the 7 boards on this page is a real design using the 74AC00. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AC00 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 6 open source designs using the 74AC00.
How is the 74AC00 pin 11 connected?
Pin 11 is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74AC00.
What parts are used alongside the 74AC00?
The 74AC04, 74AC08, 74AC138 and 74AC74 appear in the most repositories here.
Which microcontrollers do boards using the 74AC00 use?
Most are built on ESP32 (1), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the 74AC00?
The median is 150 × 88.9 mm, and 71% are two-layer designs.
What is the most popular open source board using the 74AC00?
By GitHub stars, Mainboard by c0pperdragon, with 20 stars.
Can I simulate one of these boards using the 74AC00 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.