5 open source boards using the 74AC08
Real designs built with the 74AC08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CFT Processor Board 0
alexiosc
233.4 × 280 mm274 parts2LGPL-3.06Z80DevBoard
dbuchwald
101.6 × 83.8 mm36 parts2LMIT3Raspberry Pi
Clementina hardware
fran150
172.7 × 108.6 mm42 parts2LGPL-3.00Cft ctl
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06Cft ctl dip
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06
The 74AC08 in open source designs
The gallery holds 5 open source boards using the 74AC08 from 3 GitHub repositories; a typical one measures about 131.9 × 164.6 mm and carries around 195 components.
60% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is CFT Processor Board 0 by alexiosc.
Microcontrollers on boards using the 74AC08
What boards using the 74AC08 are built for
74AC08: common questions
Where can I find a 74AC08 reference design?
Each of the 5 boards on this page is a real design using the 74AC08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 74AC08?
The 74AC00, 74AC138 and 74AC74 appear in the most repositories here.
Which microcontrollers do boards using the 74AC08 use?
Most are built on Raspberry Pi (1).
How big is a typical board using the 74AC08?
The median is 131.9 × 164.6 mm, and 60% are two-layer designs.
What is the most popular open source board using the 74AC08?
By GitHub stars, CFT Processor Board 0 by alexiosc, with 6 stars.
Can I simulate one of these boards using the 74AC08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.