7 open source boards using the 74AC138
Real designs built with the 74AC138, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
65816-computer
mike42
169.7 × 99.8 mm92 parts4LNo license34Z80DevBoard
dbuchwald
101.6 × 83.8 mm36 parts2LMIT3Color
Noah1989
160 × 100 mm75 parts2LMIT2Raspberry Pi
Clementina hardware
fran150
172.7 × 108.6 mm42 parts2LGPL-3.00Graphics
Noah1989
160 × 100 mm67 parts2LMIT2Cpu new
Noah1989
160 × 100 mm58 parts2LMIT2STM32
RAMROM CPLD board
roberto314
100 × 100 mm42 parts2LNo license1
How designs wire the 74AC138
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74AC138 connects to, and the resistors, capacitors and other passives placed on it.
- The G1 pin is tied to 5V on 4 of 5 designs.
- The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| G1pin 6 | Connected to: 5V 80% · a signal 20% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 65816-computer by mike42, Z80DevBoard by dbuchwald, Color by Noah1989 and RAMROM CPLD board by roberto314.
The 74AC138 in open source designs
The gallery holds 7 open source boards using the 74AC138 from 5 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 58 components.
86% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is 65816-computer by mike42.
Microcontrollers on boards using the 74AC138
What boards using the 74AC138 are built for
74AC138: common questions
Where can I find a 74AC138 reference design?
Each of the 7 boards on this page is a real design using the 74AC138. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74AC138 G1 pin connected?
The G1 pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74AC138.
What decoupling capacitors do designs use on the 74AC138 VCC pin?
The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74AC138.
What parts are used alongside the 74AC138?
The 74AC00, 74AC08, 74AC245, 74AC573 and 74AC74 appear in the most repositories here.
Which microcontrollers do boards using the 74AC138 use?
Most are built on Raspberry Pi (1) and STM32 (1).
How big is a typical board using the 74AC138?
The median is 160 × 100 mm, and 86% are two-layer designs.
What is the most popular open source board using the 74AC138?
By GitHub stars, 65816-computer by mike42, with 34 stars.
Can I simulate one of these boards using the 74AC138 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.