12 open source boards using the 74HCT374
Real designs built with the 74HCT374, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dueottosei
na103
138 × 108 mm85 parts4LCC-BY-NC-4.037AVR/Arduino
Utracer11
j-hoppe
132.3 × 214.1 mm128 parts4LBSD-3-Clause2P8x peripheral card
ksr
280 × 140 mm101 parts4LNo license0Atonceplus
na103
135 × 105 mm85 parts4LCC-BY-NC-4.037ZX Diagnostic 2021
tebl
57.9 × 61.6 mm29 parts2LCERN-OHL-1.232AVR/Arduino
Utracer11.unrouted
j-hoppe
132.3 × 214.1 mm128 parts4LBSD-3-Clause2WolfNet 6502 WBC - Debug Card
WolfNet-Computing
127 × 88.9 mm37 parts4LSHL-2.11P8x io card
ksr
280 × 140 mm62 parts4LNo license0AVR/Arduino
RC2014-Leonardo-Micro-Interface
dennisperry
104 × 50 mm24 parts2LNo license0P8x control card
ksr
280 × 140 mm55 parts4LNo license0P8x cf card
ksr
280 × 140 mm35 parts4LNo license0P8x ps2-card
ksr
280 × 140 mm30 parts4LNo license0
How designs wire the 74HCT374
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74HCT374 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: VCC 83% · a signal 17% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dueottosei by na103, ZX Diagnostic 2021 by tebl, Utracer11 by j-hoppe and WolfNet 6502 WBC - Debug Card by WolfNet-Computing.
The 74HCT374 in open source designs
The gallery holds 12 open source boards using the 74HCT374 from 6 GitHub repositories; a typical one measures about 136.5 × 140 mm and carries around 59 components.
83% use four copper layers or more, and 25% carry an open source license.
The most starred is Dueottosei by na103.
Parts used alongside the 74HCT374
Microcontrollers on boards using the 74HCT374
What boards using the 74HCT374 are built for
74HCT374: common questions
Where can I find a 74HCT374 reference design?
Each of the 12 boards on this page is a real design using the 74HCT374. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT374 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 74HCT374.
What parts are used alongside the 74HCT374?
The 74HCT74, 74HCT138, 74HCT14, 74HCT30 and MAX232 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT374 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the 74HCT374?
The median is 136.5 × 140 mm, and 17% are two-layer designs.
What is the most popular open source board using the 74HCT374?
By GitHub stars, Dueottosei by na103, with 37 stars.
Can I simulate one of these boards using the 74HCT374 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.