14 open source boards using the 74HCT30
Real designs built with the 74HCT30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.05AVR/Arduino
Utracer11
j-hoppe
132.3 × 214.1 mm128 parts4LBSD-3-Clause2RC2014-Turbo-Sound
r0b0t1cu
101.6 × 90.2 mm56 parts2LCERN-OHL-P-2.01P8x peripheral card
ksr
280 × 140 mm101 parts4LNo license0AVR/Arduino
Utracer11.unrouted
j-hoppe
132.3 × 214.1 mm128 parts4LBSD-3-Clause2Main board
nojan1
230 × 100 mm74 parts4LNo license0Commodore VIC-20 8KB RAM Expansion
BrettHallen
62.9 × 61.6 mm15 parts2LNo license4P8x io card
ksr
280 × 140 mm62 parts4LNo license0P8x cf card
ksr
280 × 140 mm35 parts4LNo license0P8x memory card
ksr
280 × 140 mm35 parts4LNo license0P8x ps2-card
ksr
280 × 140 mm30 parts4LNo license0
How designs wire the 74HCT30
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 74HCT30 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 9 is left unconnected on 9 of 9 designs.
- Pin 10 is left unconnected on 9 of 9 designs.
- Pin 13 is left unconnected on 9 of 9 designs.
- The VCC pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 100% | — |
| Pin 9 | Connected to: Not connected 100% | — |
| Pin 10 | Connected to: Not connected 100% | — |
| Pin 13 | Connected to: Not connected 100% | — |
| VCCpin 14 | Connected to: VCC 89% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Omega-Mainboard by merlinkv, Omega-Mainboard by msx-solis and Omega mainboard1.3eu by msx-solis.
The 74HCT30 in open source designs
The gallery holds 14 open source boards using the 74HCT30 from 9 GitHub repositories; a typical one measures about 280 × 140 mm and carries around 88 components.
57% use four copper layers or more, and 50% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the 74HCT30
Microcontrollers on boards using the 74HCT30
What boards using the 74HCT30 are built for
74HCT30: common questions
Where can I find a 74HCT30 reference design?
Each of the 14 boards on this page is a real design using the 74HCT30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HCT30 pin 9 connected?
Pin 9 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the 74HCT30.
How is the 74HCT30 pin 10 connected?
Pin 10 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the 74HCT30.
How is the 74HCT30 pin 13 connected?
Pin 13 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the 74HCT30.
What parts are used alongside the 74HCT30?
The 74HCT04, 74HCT157, 74HCT273, 74HCT74 and YM2149 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT30 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 74HCT30?
The median is 280 × 140 mm, and 43% are two-layer designs.
What is the most popular open source board using the 74HCT30?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74HCT30 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.