7 open source boards using the 74LS133
Real designs built with the 74LS133, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vic2020mainboard
danwerner21
357.8 × 124.5 mm127 parts2LNo license786809v2
jbevren
99.1 × 99.1 mm52 parts2LNo license22YN2413 MOTO
dinoflorenzi
61 × 69.9 mm32 parts2LNo license9KIM-1 RAMpager
hkzlab
123.4 × 134.6 mm65 parts2LCC-BY-NC-4.01SN76489 MOTO
dinoflorenzi
58.4 × 69.9 mm25 parts2LNo license9- schematic only · 19 parts
Microtek-Dumpling-GX
markadev
19 parts2LNo license23 Hx f101 cart
popolonx
100 × 85.1 mm24 parts2LNo license7
How designs wire the 74LS133
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LS133 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_16 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_8pin 8 | Connected to: GND 100% | — |
| VCC_16pin 16 | Connected to: 5V 100% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vic2020mainboard by danwerner21, 6809v2 by jbevren, SN76489 MOTO by dinoflorenzi and Hx f101 cart by popolonx.
The 74LS133 in open source designs
The gallery holds 7 open source boards using the 74LS133 from 6 GitHub repositories; a typical one measures about 99.5 × 92.1 mm and carries around 32 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Vic2020mainboard by danwerner21.
Parts used alongside the 74LS133
What boards using the 74LS133 are built for
74LS133: common questions
Where can I find a 74LS133 reference design?
Each of the 7 boards on this page is a real design using the 74LS133. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS133 VCC_16 pin?
The VCC_16 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74LS133.
What parts are used alongside the 74LS133?
The 74LS00, 74LS04, 74LS02, 74LS08 and 74LS138 appear in the most repositories here.
How big is a typical board using the 74LS133?
The median is 99.5 × 92.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74LS133?
By GitHub stars, Vic2020mainboard by danwerner21, with 78 stars.
Can I simulate one of these boards using the 74LS133 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.