8 open source boards using the 74LVC1G08GV
Real designs built with the 74LVC1G08GV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
H616 devboard
Kononenko-K
58 × 66 mm161 parts4LCERN-OHL-P-2.039RP2040/RP2350
Pico H-bridge complete
rosstimo
84.1 × 66 mm77 parts4LCC-BY-NC-4.01Afx-1000
AxelMcKenna
100 × 100 mm106 parts4LNo license0CTRL panelized
Astronuat21
99.8 × 92.3 mm71 parts2LAGPL-3.05ESP32
Shack Relay Matrix rev C: shack interface
PE1RGU
160 × 161 mm265 parts4LCERN-OHL-S-2.02CTRL R
Astronuat21
36.9 × 92.2 mm28 parts2LAGPL-3.05ESP32
Shack Relay Matrix rev C: controller board
PE1RGU
152 × 122.5 mm79 parts4LCERN-OHL-S-2.02CTRL L
Astronuat21
34 × 63.9 mm25 parts2LAGPL-3.05
How designs wire the 74LVC1G08GV
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LVC1G08GV connects to, and the resistors, capacitors and other passives placed on it.
- Pin 4 has a series resistor on 2 of 5 designs, most often 240 Ω (then 22 kΩ).
- The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 2.2 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 100% | — |
| Pin 4 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: 3.3V 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include H616 devboard by Kononenko-K, CTRL L by Astronuat21, Shack Relay Matrix rev C: controller board by PE1RGU and Pico H-bridge complete by rosstimo.
The 74LVC1G08GV in open source designs
The gallery holds 8 open source boards using the 74LVC1G08GV from 5 GitHub repositories; a typical one measures about 92 × 92.2 mm and carries around 78 components.
63% use four copper layers or more, and 75% carry an open source license.
The most starred is H616 devboard by Kononenko-K.
Microcontrollers on boards using the 74LVC1G08GV
What boards using the 74LVC1G08GV are built for
74LVC1G08GV: common questions
Where can I find a 74LVC1G08GV reference design?
Each of the 8 boards on this page is a real design using the 74LVC1G08GV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 74LVC1G08GV pin 4?
Pin 4 has a series resistor on 2 of 5 designs, most often 240 Ω (then 22 kΩ). Counted from the KiCad layouts of 5 open source designs using the 74LVC1G08GV.
What decoupling capacitors do designs use on the 74LVC1G08GV VCC pin?
The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 2.2 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the 74LVC1G08GV.
Which microcontrollers do boards using the 74LVC1G08GV use?
Most are built on ESP32 (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the 74LVC1G08GV?
The median is 92 × 92.2 mm, and 38% are two-layer designs.
What is the most popular open source board using the 74LVC1G08GV?
By GitHub stars, H616 devboard by Kononenko-K, with 39 stars.
Can I simulate one of these boards using the 74LVC1G08GV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.