8 open source boards using the 74LVC2G125
Real designs built with the 74LVC2G125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
GD32
KiCad-GD32F427RE-LTC-SMPTE-no-PHY
vanvught
66.6 × 69.3 mm52 parts2LMIT1KiCad-DMX-Pixel-1
vanvught
84.8 × 62.1 mm31 parts2LMIT1Testboards
siyka-au
33.8 × 32.8 mm10 parts2LNo license0AVR/Arduino
UFH Process Computer - CPU
csdexter
90.9 × 84.6 mm69 parts2LGPL-3.00STM32
StickForm
grumat
51.5 × 20 mm60 parts2LGPL-2.015IcE1usb RS422 extension
osmocom
37.5 × 32.5 mm52 parts4LNo license9AVR/Arduino
Valhalla UFH Sensor (SMT)
csdexter
99.6 × 64.3 mm53 parts2LGPL-3.00RC2014 Z80 CTC & DS1302 RTC
dennisperry
104 × 48.5 mm29 parts2LNo license0
How designs wire the 74LVC2G125
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LVC2G125 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 5V 100% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include StickForm by grumat, IcE1usb RS422 extension by osmocom, KiCad-DMX-Pixel-1 by vanvught and KiCad-GD32F427RE-LTC-SMPTE-no-PHY by vanvught.
The 74LVC2G125 in open source designs
The gallery holds 8 open source boards using the 74LVC2G125 from 7 GitHub repositories; a typical one measures about 75.7 × 55.3 mm and carries around 52 components.
88% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is StickForm by grumat.
Parts used alongside the 74LVC2G125
Microcontrollers on boards using the 74LVC2G125
What boards using the 74LVC2G125 are built for
74LVC2G125: common questions
Where can I find a 74LVC2G125 reference design?
Each of the 8 boards on this page is a real design using the 74LVC2G125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC2G125 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 74LVC2G125.
Which microcontrollers do boards using the 74LVC2G125 use?
Most are built on AVR/Arduino (2), GD32 (1) and STM32 (1).
How big is a typical board using the 74LVC2G125?
The median is 75.7 × 55.3 mm, and 88% are two-layer designs.
What is the most popular open source board using the 74LVC2G125?
By GitHub stars, StickForm by grumat, with 15 stars.
Can I simulate one of these boards using the 74LVC2G125 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.