9 open source boards using the 7SEGMENT_CC
Real designs built with the 7SEGMENT_CC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT3148bitCPU
BrainwashAlpha
246.4 × 185.4 mm277 parts4LNo license1AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT08-Bit-Computer
phteven7
246.4 × 185.4 mm277 parts4LNo license08bit computer
tonygilkerson
246.4 × 185.4 mm277 parts4LNo license0Backtobasic
marcusyoung
246.4 × 185.4 mm277 parts4LNo license08bit computer
funkybooboo
246.4 × 185.4 mm277 parts4LNo license08bit-Sch old-
Arvind595
246.4 × 185.4 mm277 parts4LNo license08bit computer
ChargeInMotion
246.4 × 185.4 mm276 parts4LMIT0
The 7SEGMENT_CC in open source designs
The gallery holds 9 open source boards using the 7SEGMENT_CC from 9 GitHub repositories; a typical one measures about 246.4 × 185.4 mm and carries around 277 components.
78% use four copper layers or more, and 33% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 7SEGMENT_CC
Microcontrollers on boards using the 7SEGMENT_CC
What boards using the 7SEGMENT_CC are built for
7SEGMENT_CC: common questions
Where can I find a 7SEGMENT_CC reference design?
Each of the 9 boards on this page is a real design using the 7SEGMENT_CC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 7SEGMENT_CC?
The 74LS157, 28C16, 74189, 74LS00 and 74LS02 appear in the most repositories here.
Which microcontrollers do boards using the 7SEGMENT_CC use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 7SEGMENT_CC?
The median is 246.4 × 185.4 mm, and 22% are two-layer designs.
What is the most popular open source board using the 7SEGMENT_CC?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 7SEGMENT_CC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.