7 open source boards using the AD724
Real designs built with the AD724, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zx sizif-512
UzixLS
213 × 65.1 mm203 parts2LMIT194OpenVideoModulator
SukkoPera
38.6 × 24.9 mm20 parts2LCustom license49ESP8266
ZXUNO.1010
UzixLS
100 × 100 mm215 parts2LMIT23MetaphoricV2
OldWer
204.5 × 138 mm140 parts2LCC0-1.05Oric
Board-Folk
206.2 × 138.1 mm127 parts2LNo license4Full
durangoretro
177.8 × 130.8 mm121 parts2LNo license04bp NOZIFF MD9
RIP-Felix
38.8 × 47.4 mm108 parts2LCERN-OHL-S-2.049
How designs wire the AD724
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AD724 connects to, and the resistors, capacitors and other passives placed on it.
- The RIN pin has a series capacitor on 7 of 7 designs, most often 100 nF.
- The GIN pin has a series capacitor on 7 of 7 designs, most often 100 nF.
- The BIN pin has a series capacitor on 7 of 7 designs, most often 100 nF.
- The COMP pin has a series capacitor on 6 of 7 designs, most often 220 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| AGNDpin 2 | Connected to: GND 100% | — |
| FINpin 3 | Connected to: Signal 100% |
|
| APOSpin 4 | Connected to: 5V 86% | — |
| ENCDpin 5 | Connected to: 5V 71% · a signal 29% | — |
| RINpin 6 | Connected to: Signal 100% |
|
| GINpin 7 | Connected to: Signal 100% |
|
| BINpin 8 | Connected to: Signal 100% |
|
| CRMApin 9 | Connected to: Not connected 57% · a signal 43% |
|
| COMPpin 10 | Connected to: Signal 86% |
|
| LUMApin 11 | Connected to: Not connected 71% · a signal 29% | — |
| SELECTpin 12 | Connected to: GND 100% | — |
| DGNDpin 13 | Connected to: GND 100% | — |
| DPOSpin 14 | Connected to: 5V 86% | — |
| VSYNCpin 15 | Connected to: 5V 71% · a signal 29% |
|
| HSYNCpin 16 | Connected to: A connector 29%, 74LS365 29% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zx sizif-512 by UzixLS, 4bp NOZIFF MD9 by RIP-Felix, OpenVideoModulator by SukkoPera and ZXUNO.1010 by UzixLS.
The AD724 in open source designs
The gallery holds 7 open source boards using the AD724 from 7 GitHub repositories; a typical one measures about 177.8 × 100 mm and carries around 127 components.
100% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is Zx sizif-512 by UzixLS.
Parts used alongside the AD724
Microcontrollers on boards using the AD724
What boards using the AD724 are built for
AD724: common questions
Where can I find a AD724 reference design?
Each of the 7 boards on this page is a real design using the AD724. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AD724 RIN pin connected?
The RIN pin has a series capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the AD724.
How is the AD724 GIN pin connected?
The GIN pin has a series capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the AD724.
How is the AD724 BIN pin connected?
The BIN pin has a series capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the AD724.
What parts are used alongside the AD724?
The 4464, 74LS00, 74LS257, 74LS365 and AY-3-8910 appear in the most repositories here.
Which microcontrollers do boards using the AD724 use?
Most are built on ESP8266 (1).
How big is a typical board using the AD724?
The median is 177.8 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the AD724?
By GitHub stars, Zx sizif-512 by UzixLS, with 194 stars.
Can I simulate one of these boards using the AD724 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.