7 open source boards using the AEM10941-QFN
Real designs built with the AEM10941-QFN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Plantpal
teapotlaboratories
38.4 × 128.5 mm109 parts4LMIT98Teapotlabs BWLR1E
teapotlaboratories
36.8 × 90.9 mm50 parts2LMIT35ESP32
EverAliveSensor
jfm92
64 × 50 mm50 parts2LCC-BY-NC-4.027Bwlr3d
teapotlaboratories
36.8 × 90.9 mm88 parts2LMIT18ESP32
Plantpal
rajeev2705
38.4 × 128.5 mm110 parts4LNo license0Teapotlabs BWLR1E
Volumetry
36.8 × 90.9 mm50 parts2LNo license0STM32
Solar telemetry
pgupta9204
22 × 26 mm38 parts4LNo license0
How designs wire the AEM10941-QFN
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AEM10941-QFN connects to, and the resistors, capacitors and other passives placed on it.
- The BOOST pin has a capacitor to GND on 7 of 7 designs, most often 22 µF.
- The SWBOOST pin has a inductor on 7 of 7 designs, most often 10 µH (then 22 µH).
- The SWBUCK pin has a inductor on 6 of 7 designs, most often 10 µH.
- The BUCK pin has a inductor on 6 of 7 designs, most often 10 µH.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BOOSTpin 1 | Connected to: Signal 100% |
|
| SWBUCKpin 2 | Connected to: Signal 86% |
|
| BUCKpin 3 | Connected to: Signal 86% |
|
| CFG[2]pin 4 | Connected to: Signal 71% · GND 29% |
|
| CFG[1]pin 5 | Connected to: Signal 71% |
|
| CFG[0]pin 6 | Connected to: Signal 71% · GND 29% |
|
| FB_PRIM_Dpin 9 | Connected to: GND 71% | — |
| FB_PRIM_Upin 10 | Connected to: GND 71% | — |
| LVOUTpin 11 | Connected to: Not connected 100% | — |
| ENHVpin 12 | Connected to: GND 71% | — |
| FB_HVpin 13 | Connected to: Not connected 86% | — |
| HVOUTpin 14 | Connected to: Not connected 71% | — |
| BALpin 15 | Connected to: GND 100% | — |
| BATTpin 16 | Connected to: BATT+ 86% |
|
| PRIMpin 17 | Connected to: GND 86% | — |
| ENLVpin 18 | Connected to: GND 100% | — |
| STATUS[2]pin 19 | Connected to: Not connected 71% · a signal 29% | — |
| STATUS[1]pin 20 | Connected to: Signal 86% |
|
| SET_OVCHpin 22 | Connected to: Not connected 86% | — |
| SET_CHRDYpin 23 | Connected to: Not connected 86% | — |
| SET_OVDISpin 24 | Connected to: Not connected 86% | — |
| BUFSRCpin 27 | Connected to: Signal 86% |
|
| SWBOOSTpin 28 | Connected to: Signal 100% |
|
| GNDpin 29 | Connected to: GND 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Plantpal by teapotlaboratories, Teapotlabs BWLR1E by teapotlaboratories, EverAliveSensor by jfm92 and Bwlr3d by teapotlaboratories.
The AEM10941-QFN in open source designs
The gallery holds 7 open source boards using the AEM10941-QFN from 7 GitHub repositories; a typical one measures about 36.8 × 90.9 mm and carries around 50 components.
57% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Plantpal by teapotlaboratories.
Parts used alongside the AEM10941-QFN
What boards using the AEM10941-QFN are built for
AEM10941-QFN: common questions
Where can I find a AEM10941-QFN reference design?
Each of the 7 boards on this page is a real design using the AEM10941-QFN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AEM10941-QFN BOOST pin connected?
The BOOST pin has a capacitor to GND on 7 of 7 designs, most often 22 µF. Counted from the KiCad layouts of 7 open source designs using the AEM10941-QFN.
How is the AEM10941-QFN SWBOOST pin connected?
The SWBOOST pin has a inductor on 7 of 7 designs, most often 10 µH (then 22 µH). Counted from the KiCad layouts of 7 open source designs using the AEM10941-QFN.
How is the AEM10941-QFN SWBUCK pin connected?
The SWBUCK pin has a inductor on 6 of 7 designs, most often 10 µH. Counted from the KiCad layouts of 7 open source designs using the AEM10941-QFN.
What parts are used alongside the AEM10941-QFN?
The BME688, XC6215B332MR-G, 309054, ESP32-C6FH4 and MCP73831T-2ACI/OT appear in the most repositories here.
Which microcontrollers do boards using the AEM10941-QFN use?
Most are built on ESP32 (3) and STM32 (1).
How big is a typical board using the AEM10941-QFN?
The median is 36.8 × 90.9 mm, and 57% are two-layer designs.
What is the most popular open source board using the AEM10941-QFN?
By GitHub stars, Plantpal by teapotlaboratories, with 98 stars.
Can I simulate one of these boards using the AEM10941-QFN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.