4 open source boards using the AMC3311QDWERQ1

Real designs built with the AMC3311QDWERQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The AMC3311QDWERQ1 in open source designs

The gallery holds 4 open source boards using the AMC3311QDWERQ1 from 4 GitHub repositories; a typical one measures about 90 × 74 mm and carries around 79 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Fsk energymeter by luftaquila.

Microcontrollers on boards using the AMC3311QDWERQ1

What boards using the AMC3311QDWERQ1 are built for

AMC3311QDWERQ1: common questions

Where can I find a AMC3311QDWERQ1 reference design?

Each of the 4 boards on this page is a real design using the AMC3311QDWERQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AMC3311QDWERQ1?

The AMS1117-3.3, L78L05ABUTR, LM2675MX-5.0/NOPB, LM324DR and NCP51460SN33T1G appear in the most repositories here.

Which microcontrollers do boards using the AMC3311QDWERQ1 use?

Most are built on STM32 (4).

How big is a typical board using the AMC3311QDWERQ1?

The median is 90 × 74 mm, and 100% are two-layer designs.

What is the most popular open source board using the AMC3311QDWERQ1?

By GitHub stars, Fsk energymeter by luftaquila, with 13 stars.

Can I simulate one of these boards using the AMC3311QDWERQ1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part