13 open source boards using the TLV9001IDBVR

Real designs built with the TLV9001IDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the TLV9001IDBVR

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TLV9001IDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The + pin has a series resistor on 10 of 11 designs, most often 3.3 kΩ (then 1 kΩ).
  • The -_4 pin has a series resistor on 10 of 11 designs, most often 3.3 kΩ (then 1 kΩ).
  • The V- pin is tied to GND on 11 of 11 designs.
  • The - pin has a series resistor on 8 of 11 designs, most often 3.3 kΩ (then 10 kΩ).
+pin 1Connected to: Signal 100%
  • Series resistor on 91% · 3.3 kΩ (4), 1 kΩ (2), 150 Ω (1)
  • Capacitor to GND on 36% · 330 pF (4)
  • Resistor to GND on 36% · 3.3 kΩ (4)
V-pin 2Connected to: GND 100%
-pin 3Connected to: Signal 100%
  • Series resistor on 73% · 3.3 kΩ (10), 10 kΩ (3), 4.7 kΩ (1)
  • Resistor to GND on 45% · 100 kΩ (2), 470 kΩ (1), 10 kΩ (1)
  • Series capacitor on 36% · 330 pF (4)
-_4pin 4Connected to: The microcontroller 36%
  • Series resistor on 91% · 3.3 kΩ (4), 1 kΩ (2), 100 Ω (2)
  • Series capacitor on 55% · 330 pF (4), 10 pF (2)
V+pin 5Connected to: 3.3V 91%
  • Decoupling capacitor on 64% · 100 nF (9), 1 µF (2), 4.7 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Spikeling by OpenSourceNeuro, Fsk energymeter by luftaquila, MagMouse by sbarisic and Atlas2350 connected LiPo development board by Amronos.

The TLV9001IDBVR in open source designs

The gallery holds 13 open source boards using the TLV9001IDBVR from 11 GitHub repositories; a typical one measures about 90 × 75 mm and carries around 81 components.

62% are two-layer designs, the rest use four layers or more, and 15% carry an open source license.

The most starred is Spikeling by OpenSourceNeuro.

Microcontrollers on boards using the TLV9001IDBVR

TLV9001IDBVR: common questions

Where can I find a TLV9001IDBVR reference design?

Each of the 13 boards on this page is a real design using the TLV9001IDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TLV9001IDBVR + pin?

The + pin has a series resistor on 10 of 11 designs, most often 3.3 kΩ (then 1 kΩ). Counted from the KiCad layouts of 11 open source designs using the TLV9001IDBVR.

What resistor goes on the TLV9001IDBVR -_4 pin?

The -_4 pin has a series resistor on 10 of 11 designs, most often 3.3 kΩ (then 1 kΩ). Counted from the KiCad layouts of 11 open source designs using the TLV9001IDBVR.

How is the TLV9001IDBVR V- pin connected?

The V- pin is tied to GND on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the TLV9001IDBVR.

What parts are used alongside the TLV9001IDBVR?

The AMC3311QDWERQ1, AMS1117-3.3, L78L05ABUTR, LM2675MX-5.0/NOPB and LM324DR appear in the most repositories here.

Which microcontrollers do boards using the TLV9001IDBVR use?

Most are built on ESP32 (4), STM32 (4) and RP2040/RP2350 (1).

How big is a typical board using the TLV9001IDBVR?

The median is 90 × 75 mm, and 62% are two-layer designs.

What is the most popular open source board using the TLV9001IDBVR?

By GitHub stars, Spikeling by OpenSourceNeuro, with 21 stars.

Can I simulate one of these boards using the TLV9001IDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part