10 open source boards using the NCP51460SN33T1G

Real designs built with the NCP51460SN33T1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the NCP51460SN33T1G

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the NCP51460SN33T1G connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 2.2 µF).
  • The VOUT pin has a decoupling capacitor on 9 of 9 designs, most often 1 µF (then 10 nF).
VINpin 1Connected to: 5V 100%
  • Decoupling capacitor on 100% · 100 nF (7), 2.2 µF (2)
VOUTpin 2Connected to: VREF 67% · a signal 33%
  • Decoupling capacitor on 100% · 1 µF (7), 10 nF (5), 100 nF (2)
GNDpin 3Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fsk energymeter by luftaquila, Cyclope by RICCIARDI-Adrien, Mp153-devboard by 4ms and MidiLedController hw by cracked-machine.

The NCP51460SN33T1G in open source designs

The gallery holds 10 open source boards using the NCP51460SN33T1G from 9 GitHub repositories; a typical one measures about 90 × 74 mm and carries around 97 components.

60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Fsk energymeter by luftaquila.

Microcontrollers on boards using the NCP51460SN33T1G

NCP51460SN33T1G: common questions

Where can I find a NCP51460SN33T1G reference design?

Each of the 10 boards on this page is a real design using the NCP51460SN33T1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the NCP51460SN33T1G VIN pin?

The VIN pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 9 open source designs using the NCP51460SN33T1G.

What decoupling capacitors do designs use on the NCP51460SN33T1G VOUT pin?

The VOUT pin has a decoupling capacitor on 9 of 9 designs, most often 1 µF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the NCP51460SN33T1G.

What parts are used alongside the NCP51460SN33T1G?

The AMC3311QDWERQ1, AMS1117-3.3, L78L05ABUTR, LM2675MX-5.0/NOPB and LM324DR appear in the most repositories here.

Which microcontrollers do boards using the NCP51460SN33T1G use?

Most are built on STM32 (9).

How big is a typical board using the NCP51460SN33T1G?

The median is 90 × 74 mm, and 60% are two-layer designs.

What is the most popular open source board using the NCP51460SN33T1G?

By GitHub stars, Fsk energymeter by luftaquila, with 13 stars.

Can I simulate one of these boards using the NCP51460SN33T1G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part