3 open source boards using the AP40P05

Real designs built with the AP40P05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The AP40P05 in open source designs

The gallery holds 3 open source boards using the AP40P05 from 3 GitHub repositories; a typical one measures about 43.2 × 77.6 mm and carries around 76 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is KiCad-PCB-design workshop by LEDs-by-glowingkitty.

Microcontrollers on boards using the AP40P05

AP40P05: common questions

Where can I find a AP40P05 reference design?

Each of the 3 boards on this page is a real design using the AP40P05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AP40P05?

The AO3400A, MSM261D4030H1CPM, SN74LVC1G373DBVR, SN74LVC2T45DCUR and 74LVC2G04DW-7 appear in the most repositories here.

Which microcontrollers do boards using the AP40P05 use?

Most are built on ESP32 (3).

How big is a typical board using the AP40P05?

The median is 43.2 × 77.6 mm, and 50% are two-layer designs.

What is the most popular open source board using the AP40P05?

By GitHub stars, KiCad-PCB-design workshop by LEDs-by-glowingkitty, with 9 stars.

Can I simulate one of these boards using the AP40P05 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part