6 open source boards using the SN74LVC1G373DBVR
Real designs built with the SN74LVC1G373DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Tokay lite
maxlab-io
70 × 70 mm146 parts4LCERN-OHL-P-2.0129ESP32
MaxLab AI Camera
Valar-Systems
70 × 70 mm146 parts4LCERN-OHL-S-2.0112- schematic only · 56 partsESP32
KiCad-PCB-design workshop
LEDs-by-glowingkitty
56 partsGPL-3.09 ESP32
Main
LEDs-by-glowingkitty
58.5 × 120.9 mm117 parts4LGPL-3.05ESP32
GlowBand
LEDs-by-glowingkitty
27.9 × 34.3 mm76 parts2LMIT4ESP32
MaxLab AI Camera
MAHESH-THILAK-K
70 × 70 mm146 parts4LApache-2.00
How designs wire the SN74LVC1G373DBVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1G373DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The Q pin has a series resistor on 4 of 5 designs, most often 10 kΩ (then 100 kΩ).
- The G pin is tied to GND on 4 of 5 designs.
- The LE pin has a resistor to GND on 3 of 5 designs, most often 215 kΩ.
- The D pin has a resistor to GND on 3 of 5 designs, most often 215 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| LEpin 1 | Connected to: The microcontroller 100% |
|
| Gpin 2 | Connected to: GND 80% · a signal 20% | — |
| Dpin 3 | Connected to: The microcontroller 100% |
|
| Qpin 4 | Connected to: AO3400A 40% |
|
| VCCpin 5 | Connected to: AS312 60%, XC6206-2.8V 60% · 3.3V 40% |
|
| OEpin 6 | Connected to: GND 60% · not connected 40% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tokay lite pcb by maxlab-io, MaxLab AI Camera by Valar-Systems, MainPCB by LEDs-by-glowingkitty and GlowBand PCB by LEDs-by-glowingkitty.
The SN74LVC1G373DBVR in open source designs
The gallery holds 6 open source boards using the SN74LVC1G373DBVR from 6 GitHub repositories; a typical one measures about 70 × 70 mm and carries around 132 components.
80% use four copper layers or more, and 100% carry an open source license.
The most starred is Tokay lite pcb by maxlab-io.
Parts used alongside the SN74LVC1G373DBVR
Microcontrollers on boards using the SN74LVC1G373DBVR
What boards using the SN74LVC1G373DBVR are built for
SN74LVC1G373DBVR: common questions
Where can I find a SN74LVC1G373DBVR reference design?
Each of the 6 boards on this page is a real design using the SN74LVC1G373DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SN74LVC1G373DBVR Q pin?
The Q pin has a series resistor on 4 of 5 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G373DBVR.
How is the SN74LVC1G373DBVR G pin connected?
The G pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G373DBVR.
What resistor goes on the SN74LVC1G373DBVR LE pin?
The LE pin has a resistor to GND on 3 of 5 designs, most often 215 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G373DBVR.
What parts are used alongside the SN74LVC1G373DBVR?
The AO3400A, AP1511B, AP40P05, AS312 and ESP32-S3-WROOM-1-N16R8 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G373DBVR use?
Most are built on ESP32 (6).
How big is a typical board using the SN74LVC1G373DBVR?
The median is 70 × 70 mm, and 20% are two-layer designs.
What is the most popular open source board using the SN74LVC1G373DBVR?
By GitHub stars, Tokay lite pcb by maxlab-io, with 129 stars.
Can I simulate one of these boards using the SN74LVC1G373DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.