5 open source boards using the MSM261D4030H1CPM
Real designs built with the MSM261D4030H1CPM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 56 partsESP32
KiCad-PCB-design workshop
LEDs-by-glowingkitty
56 partsGPL-3.09 ESP32
Main
LEDs-by-glowingkitty
58.5 × 120.9 mm117 parts4LGPL-3.05ESP32
GlowBand
LEDs-by-glowingkitty
27.9 × 34.3 mm76 parts2LMIT4ESP32
ESP32-Small-SRWLED
wszeto9
19.6 × 20.3 mm35 parts4LNo license2ESP32
ESP32-Small-SRWLED panelization
wszeto9
41.7 × 43.1 mm35 parts4LNo license2
The MSM261D4030H1CPM in open source designs
The gallery holds 5 open source boards using the MSM261D4030H1CPM from 4 GitHub repositories; a typical one measures about 34.8 × 38.7 mm and carries around 56 components.
75% use four copper layers or more, and 60% carry an open source license.
The most starred is KiCad-PCB-design workshop by LEDs-by-glowingkitty.
Parts used alongside the MSM261D4030H1CPM
Microcontrollers on boards using the MSM261D4030H1CPM
What boards using the MSM261D4030H1CPM are built for
MSM261D4030H1CPM: common questions
Where can I find a MSM261D4030H1CPM reference design?
Each of the 5 boards on this page is a real design using the MSM261D4030H1CPM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MSM261D4030H1CPM?
The AO3400A, AP40P05, SN74LVC1G373DBVR, SN74LVC2T45DCUR and 74LVC2G04DW-7 appear in the most repositories here.
Which microcontrollers do boards using the MSM261D4030H1CPM use?
Most are built on ESP32 (5).
How big is a typical board using the MSM261D4030H1CPM?
The median is 34.8 × 38.7 mm, and 25% are two-layer designs.
What is the most popular open source board using the MSM261D4030H1CPM?
By GitHub stars, KiCad-PCB-design workshop by LEDs-by-glowingkitty, with 9 stars.
Can I simulate one of these boards using the MSM261D4030H1CPM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.